This is the level 1 portion of the Best Practices for TEI in Libraries. This document is not intended to stand alone, but rather to be considered in concert with the entire TEI in Libraries recommendations.
Note that this is not a ‘TEI conformant’ customization, because it does not follow the TEI abstract model. However, this is a ‘syntactically conformant’ customization, in that documents that are valid against this scheme will also be valid against the TEI_all schema.
To create electronic text with the primary purpose of keyword searching and linking to page images. The primary advantage in using the TEI at this very strictly limited level of encoding is that a TEI header is attached to the text file.
The text is subordinate to the page image, and is not intended to stand alone as an electronic text (without page images). Level 1 texts are not intended to be adequate for textual analysis; they are more likely to be suited to the goals of a preservation unit or mass digitization initiative. Though their encoding is minimal, Level 1 texts are fully valid XML texts. In addition to taking advantage of the TEI header, these texts, while lightly encoded, can be easily combined with more richly encoded texts (that also follow these guidelines) for searching. Further encoding based on document structures or content analysis can be added to a Level 1 text at any time.
Texts at Level 1 can be created and encoded by fully automated means. Page images are scanned and processed using OCR, but the text is left uncorrected ("dirty OCR"). Page images are tagged using software that assigns page-level metadata (page number and possibly tags for page features) to each page image for display in the user interface in a list of pages. Encoding is performed automatically: markup with page-level metadata is inserted at selected points into the dirty OCR text, generating a valid XML document. This encoding is both minimal and reliable, and does not typically require extensive review of each page of each text.
| <div> or <div1> | There should be only one child of <body>: a single <div> (or <div1>). |
| <ab> | There should be only one child of the <div> (or <div1>): a single <ab> wrapping all of the OCR text. If the text is ever “upgraded” to Level 3 or higher, the <ab> element will be replaced by structural elements like <p> and <table>. |
| <pb> or <facsimile> | See the explanation above for how to link between the encoded text and images of source documents. If using <pb>, it is recommended to put the element within an <ab> element. |
| <p> | |
| Module | derived-module-lib1 |
| Contained by | header: hyphenation |
| May contain | Empty element |
| Content model |
<content>
<valList type="closed">
<valItem ident="All hyphens in source document encoded as U+2010."/>
<valItem ident="All hyphens in source document encoded as U+002D."/>
<valItem ident="Hyphens in source document encoded as U+2010. Line-ending hyphens
differentiated with @break of immediately following <lb> element."/>
<valItem ident="Hyphens in source document encoded as U+002D. Line-ending hyphens
differentiated with @break of immediately following <lb> element."/>
<valItem ident="Hyphens in source document encoded as U+2010 inside a <pc>. Line-ending
hyphens differentiated with @force of the <pc> and @break of immediately
following <lb> element."/>
<valItem ident="Hyphens in source document encoded as U+202D inside a <pc>. Line-ending
hyphens differentiated with @force of the <pc> and @break of immediately
following <lb> element."/>
</valList>
</content>
Legal values are:
|
| Schema Declaration |
element p
{
"All hyphens in source document encoded as U+2010."
| "All hyphens in source document encoded as U+002D."
| "Hyphens in source document encoded as U+2010. Line-ending hyphens differentiated with @break of immediately following <lb> element."
| "Hyphens in source document encoded as U+002D. Line-ending hyphens differentiated with @break of immediately following <lb> element."
| "Hyphens in source document encoded as U+2010 inside a <pc>. Line-ending hyphens differentiated with @force of the <pc> and @break of immediately following <lb> element."
| "Hyphens in source document encoded as U+202D inside a <pc>. Line-ending hyphens differentiated with @force of the <pc> and @break of immediately following <lb> element."
}Legal values are:
|
| lib.teins | |
| Module | derived-module-lib1 |
| Used by | Element:
|
| Content model |
<content>
<valList type="closed">
<valItem ident="http://www.tei-c.org/ns/1.0"/>
</valList>
</content>
|
| Declaration | lib1_lib.teins = "http://www.tei-c.org/ns/1.0" |
| <TEI> (TEI document) contains a single TEI-in-Libraries level 1 document, comprising a TEI header and a text, either in isolation or as part of a <teiCorpus> element. [4. Default Text Structure 15.1. Varieties of Composite Text] | |||||||||
| Module | textstructure — Level 1: Fully Automated Conversion and Encoding | ||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source))
| ||||||||
| Contained by | — | ||||||||
| May contain | |||||||||
| Note | This element is required. The TEI namespace should be specified on this element, e.g. <TEI xmlns="http://www.tei-c.org/ns/1.0">. | ||||||||
| Example | For technical reasons, the TEI namespace is not displayed in examples. However, a TEI namespace declaration is required. It is typically given once on the TEI root element, e.g. <TEI xmlns="http://www.tei-c.org/ns/1.0">. <TEI xmlns="http://www.tei-c.org/ns/1.0">
<teiHeader>
<fileDesc>
<titleStmt>
<title>A Short Level 1 Document</title>
</titleStmt>
<publicationStmt>
<p>Only published as an example.</p>
</publicationStmt>
<sourceDesc>
<p>Since this is an example, it doesn't really have a source</p>
</sourceDesc>
</fileDesc>
</teiHeader>
<text>
<body>
<div>
<ab>This is about the shortest TEI document imaginable.</ab>
</div>
</body>
</text>
</TEI> | ||||||||
| Schematron |
<s:ns prefix="tei"
uri="http://www.tei-c.org/ns/1.0"/>
<s:ns prefix="xs"
uri="http://www.w3.org/2001/XMLSchema"/> | ||||||||
| Schematron |
<s:ns prefix="rng"
uri="http://relaxng.org/ns/structure/1.0"/> | ||||||||
| Content model |
<content>
<elementRef key="teiHeader"/>
<classRef key="model.resourceLike"
minOccurs="0"/>
<elementRef key="text"/>
</content>
| ||||||||
| Schema Declaration |
element TEI
{
lib1_att.global.attributes,
attribute version { text }?,
lib1_teiHeader,
model.resourceLike?,
lib1_text
} | ||||||||
| <ab> (anonymous block) contains the entire content of the document; or, when used within the <teiHeader>, contains any arbitrary component-level unit of text, acting as an anonymous container for phrase- or inter-level elements analogous to, but without the semantic baggage of, a paragraph. [16.3. Blocks, Segments, and Anchors] | |
| Module | linking — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.typed (@type) att.fragmentable (@part) att.written (@hand) |
| Member of | |
| Contained by | |
| May contain | core: pb character data |
| Note | At level 1, the entire document is encoded as a single <ab> — one and only one <ab> must be present within <text>. Further, <ab> may be used in a variety of places within the <teiHeader>. |
| Example | <publicationStmt>
<availability>
<ab>Copyleft 2009 Syd Bauman</ab>
</availability>
</publicationStmt> |
| Example | <body>
<div>
<ab> In the beginning God created the heaven and the earth.
And the earth was without form, and void; and darkness was upon
the face of the deep. And the spirit of God moved upon the face
of the waters.
And God said, Let there be light: and there was light.
</ab>
</div>
</body> |
| Schematron |
<s:report test="(ancestor::tei:p or ancestor::tei:ab) and not(parent::tei:exemplum
|parent::tei:item |parent::tei:note |parent::tei:q |parent::tei:quote
|parent::tei:remarks |parent::tei:said |parent::tei:sp |parent::tei:stage
|parent::tei:cell |parent::tei:figure)"> Abstract model violation: ab may not contain paragraphs or other ab elements.
</s:report> |
| Schematron |
<s:report test="ancestor::tei:l or ancestor::tei:lg"> Abstract model violation: Lines may not contain higher-level divisions such as p or ab.
</s:report> |
| Content model |
<content>
<alternate minOccurs="1"
maxOccurs="unbounded">
<textNode/>
<classRef key="model.global"/>
</alternate>
</content>
|
| Schema Declaration |
element ab
{
lib1_att.global.attributes,
lib1_att.typed.attributes,
lib1_att.fragmentable.attributes,
lib1_att.written.attributes,
( text | lib1_model.global )+
} |
| att.global provides attributes common to all elements in the TEI encoding scheme. [1.3.1.1. Global Attributes] | |||||||||||||||||||||||||||||||||||||
| Module | tei — Level 1: Fully Automated Conversion and Encoding | ||||||||||||||||||||||||||||||||||||
| Members | TEI ab abbr addrLine address analytic appInfo application att author availability bibl biblScope biblStruct body change choice cit citedRange classCode classDecl correction date distributor div div1 edition editionStmt editor editorialDecl email emph encodingDesc expan extent facsimile fileDesc foreign gi gloss graphic hyphenation idno imprint item keywords label langUsage language list media monogr name namespace normalization note notesStmt orgName p pb persName postBox postCode profileDesc projectDesc ptr pubPlace publicationStmt publisher punctuation q quotation quote ref relatedItem resp respStmt revisionDesc samplingDecl schemaRef series seriesStmt sourceDesc street surface tag tagUsage tagsDecl term text textClass textLang title titleStmt val | ||||||||||||||||||||||||||||||||||||
| Attributes | Attributes att.global.rendition (@style) att.global.facs (@facs) att.global.change (@change) att.global.responsibility (@cert, @resp) att.global.source (@source)
| ||||||||||||||||||||||||||||||||||||
| att.global.rendition provides rendering attributes common to all elements in the TEI encoding scheme. [1.3.1.1.3. Rendition Indicators] | |||||||||||
| Module | tei — Level 1: Fully Automated Conversion and Encoding | ||||||||||
| Members | att.global[TEI ab abbr addrLine address analytic appInfo application att author availability bibl biblScope biblStruct body change choice cit citedRange classCode classDecl correction date distributor div div1 edition editionStmt editor editorialDecl email emph encodingDesc expan extent facsimile fileDesc foreign gi gloss graphic hyphenation idno imprint item keywords label langUsage language list media monogr name namespace normalization note notesStmt orgName p pb persName postBox postCode profileDesc projectDesc ptr pubPlace publicationStmt publisher punctuation q quotation quote ref relatedItem resp respStmt revisionDesc samplingDecl schemaRef series seriesStmt sourceDesc street surface tag tagUsage tagsDecl term text textClass textLang title titleStmt val] | ||||||||||
| Attributes | Attributes
| ||||||||||
| att.typed provides attributes which can be used to classify or subclassify elements in any way. [1.3.1. Attribute Classes 17.1.1. Words and Above 3.5.1. Referring Strings 3.6. Simple Links and Cross-References 3.5.5. Abbreviations and Their Expansions 3.12.1. Core Tags for Verse 7.2.5. Speech Contents 4.1.1. Un-numbered Divisions 4.1.2. Numbered Divisions 4.2.1. Headings and Trailers 4.4. Virtual Divisions 13.3.2.3. Personal Relationships 11.3.1.1. Core Elements for Transcriptional Work 16.1.1. Pointers and Links 16.3. Blocks, Segments, and Anchors 12.2. Linking the Apparatus to the Text 22.5.2. RELAX NG Content Models 8.3. Elements Unique to Spoken Texts 23.3.1.4. Modification of Attribute and Attribute Value Lists] | |||||||||||
| Module | tei — Level 1: Fully Automated Conversion and Encoding | ||||||||||
| Members | ab application bibl biblStruct change cit date gloss label media name note orgName pb persName ptr quote ref relatedItem schemaRef surface term text | ||||||||||
| Attributes | Attributes
| ||||||||||
| Schematron |
<sch:rule context="tei:*[@subtype]">
<sch:assert test="@type">The <sch:name/> element should not be categorized in detail with @subtype unless also categorized in general with @type</sch:assert>
</sch:rule> | ||||||||||
| Note | When appropriate, values from an established typology should be used. Alternatively a typology may be defined in the associated TEI header. If values are to be taken from a project-specific list, this should be defined using the <valList> element in the project-specific schema description, as described in 23.3.1.4. Modification of Attribute and Attribute Value Lists . | ||||||||||
| <author> in a bibliographic reference, contains the name (typically encoded as <name>, <persName>, or <orgName>) of the author, personal or corporate, of a work; for example in the same form as that provided by a recognized bibliographic name authority. [3.11.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Member of | |
| Contained by | header: editionStmt titleStmt |
| May contain | |
| Note | Particularly where cataloguing is likely to be based on the content of the header, it is advisable to use a generally recognized name authority file to supply the content for this element. The attributes key or ref may also be used to reference canonical information about the author(s) intended from any appropriate authority, such as a library catalogue or online resource. In the case of a broadcast, use this element for the name of the company or network responsible for making the broadcast. Where an author is unknown or unspecified, this element may contain text such as Unknown or Anonymous. When the appropriate TEI modules are in use, it may also contain detailed tagging of the names used for people, organizations or places, in particular where multiple names are given. |
| Example | <author>
<orgName>British Broadcasting Corporation</orgName>
</author> |
| Example | <author>
<persName ref="#mdalmau.cny">Michelle Dalmau</persName>
</author> |
| Example | <author>
<name>Matthew Gibson</name>
</author> |
| Example | <author>anonymous</author> |
| Example | <author>unknown</author> |
| Content model |
<content>
<macroRef key="macro.phraseSeq"/>
</content>
|
| Schema Declaration |
element author { lib1_att.global.attributes, lib1_macro.phraseSeq } |
| <body> (text body) contains the entirety of a single unitary text, including any front or back matter. [4. Default Text Structure] | |
| Module | textstructure — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Contained by | textstructure: text |
| May contain | |
| Note | At level 1, the content of <body> must be a single <div> or <div1> element. |
| Example | <body>
<div>
<ab> Nu scylun hergan hefaenricaes uard
metudæs maecti end his modgidanc
uerc uuldurfadur sue he uundra gihuaes
eci dryctin or astelidæ
he aerist scop aelda barnum
heben til hrofe haleg scepen.
tha middungeard moncynnæs uard
eci dryctin æfter tiadæ
firum foldu frea allmectig
primo cantauit Cædmon istud carmen.
</ab>
</div>
</body> |
| Content model |
<content>
<alternate minOccurs="1" maxOccurs="1">
<classRef key="model.divLike"/>
<classRef key="model.div1Like"/>
</alternate>
</content>
|
| Schema Declaration |
element body
{
lib1_att.global.attributes,
( lib1_model.divLike | lib1_model.div1Like )
} |
| <change> documents a change or set of changes made during the production of a source document, or during the revision of an electronic file. [2.6. The Revision Description 2.4.1. Creation 11.7. Identifying Changes and Revisions] | |||||||||||||||||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||||||||||||||||
| Attributes | Attributes att.docStatus (@status) att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.typed (@type) att.datable (@calendar, @period) att.datable.w3c (when, @notBefore, @notAfter, @from, @to) att.datable.custom (@when-custom, @notBefore-custom, @notAfter-custom, @from-custom, @to-custom, @datingPoint, @datingMethod)
| ||||||||||||||||||||||
| Contained by | header: revisionDesc | ||||||||||||||||||||||
| May contain | |||||||||||||||||||||||
| Note | The who attribute may be used to point to any other element, but will typically specify a <respStmt> or <person> element elsewhere in the header, identifying the person responsible for the change and their role in making it. It is recommended that changes be recorded with the most recent first. The status attribute may be used to indicate the status of a document following the change documented. | ||||||||||||||||||||||
| Example | <titleStmt>
<title> ... </title>
<editor xml:id="LDB">Lou Burnard</editor>
<respStmt xml:id="BZ">
<resp>copy editing</resp>
<name>Brett Zamir</name>
</respStmt>
</titleStmt>
<!-- ... -->
<revisionDesc status="published">
<change who="#BZ" when="2008-02-02"
status="public">Finished chapter 23</change>
<change who="#BZ" when="2008-01-02"
status="draft">Finished chapter 2</change>
<change n="P2.2" when="1991-12-21"
who="#LDB">Added examples to section 3</change>
<change when="1991-11-11" who="#MSM">Deleted chapter 10</change>
</revisionDesc> | ||||||||||||||||||||||
| Example | <profileDesc>
<creation>
<listChange>
<change xml:id="DRAFT1">First draft in pencil</change>
<change xml:id="DRAFT2"
notBefore="1880-12-09">First revision, mostly
using green ink</change>
<change xml:id="DRAFT3"
notBefore="1881-02-13">Final corrections as
supplied to printer.</change>
</listChange>
</creation>
</profileDesc> | ||||||||||||||||||||||
| Content model |
<content>
<macroRef key="macro.specialPara"/>
</content>
| ||||||||||||||||||||||
| Schema Declaration |
element change
{
lib1_att.datable.attribute.calendar,
lib1_att.datable.attribute.period,
lib1_att.datable.w3c.attribute.notBefore,
lib1_att.datable.w3c.attribute.notAfter,
lib1_att.datable.w3c.attribute.from,
lib1_att.datable.w3c.attribute.to,
lib1_att.datable.custom.attribute.when-custom,
lib1_att.datable.custom.attribute.notBefore-custom,
lib1_att.datable.custom.attribute.notAfter-custom,
lib1_att.datable.custom.attribute.from-custom,
lib1_att.datable.custom.attribute.to-custom,
lib1_att.datable.custom.attribute.datingPoint,
lib1_att.datable.custom.attribute.datingMethod,
lib1_att.docStatus.attributes,
lib1_att.global.attributes,
lib1_att.typed.attributes,
attribute who { list { + } },
attribute when { text },
attribute target { list { + } }?,
lib1_macro.specialPara
} | ||||||||||||||||||||||
| <div> (text division) contains a subdivision of the front, body, or back of a text. [4.1. Divisions of the Body] | |
| Module | textstructure — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.written (@hand) |
| Member of | |
| Contained by | textstructure: body |
| May contain | linking: ab |
| Note | At level 1, the content of <div> must be a single <ab> element. |
| Example | <body>
<div type="part">
<head>Fallacies of Authority</head>
<p>The subject of which is Authority in various shapes, and the object, to repress all
exercise of the reasoning faculty.</p>
<div n="1" type="chapter">
<head>The Nature of Authority</head>
<p>With reference to any proposed measures having for their object the greatest
happiness of the greatest number [...]</p>
<div n="1.1" type="section">
<head>Analysis of Authority</head>
<p>What on any given occasion is the legitimate weight or influence to be attached to
authority [...] </p>
</div>
<div n="1.2" type="section">
<head>Appeal to Authority, in What Cases Fallacious.</head>
<p>Reference to authority is open to the charge of fallacy when [...] </p>
</div>
</div>
</div>
</body> |
| Schematron |
<s:report test="ancestor::tei:l"> Abstract model violation: Lines may not contain higher-level structural elements such as div.
</s:report> |
| Schematron |
<s:report test="ancestor::tei:p or ancestor::tei:ab and not(ancestor::tei:floatingText)"> Abstract model violation: p and ab may not contain higher-level structural elements such as div.
</s:report> |
| Content model |
<content>
<elementRef key="ab"/>
</content>
|
| Schema Declaration |
element div
{
lib1_att.global.attributes,
lib1_att.written.attributes,
lib1_ab
} |
| <div1> (level-1 text division) contains a first-level subdivision of the front, body, or back of a text. [4.1.2. Numbered Divisions] | |
| Module | textstructure — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Member of | |
| Contained by | textstructure: body |
| May contain | linking: ab |
| Note | At level 1, the content of <div1> must be a single <ab> element. |
| Example | <div1 xml:id="levi" n="I" type="part">
<head>Part I: Of Man </head>
<div2 xml:id="levi1" n="1" type="chapter">
<head>Chap. I. Of Sense </head>
<p>Concerning the Thoughts of man... </p>
</div2>
</div1>
<div1 xml:id="levii" n="II" type="part">
<head>Part II: Of Common-Wealth</head>
</div1> |
| Content model |
<content>
<elementRef key="ab"/>
</content>
|
| Schema Declaration |
element div1 { lib1_att.global.attributes, lib1_ab } |
| <editor> contains the name (typically encoded as <name>, <persName>, or <orgName>) of an individual, institution, or organization acting as editor. [3.11.2.2. Titles, Authors, and Editors] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Member of | |
| Contained by | header: editionStmt seriesStmt titleStmt |
| May contain | |
| Note | A consistent format should be adopted. Particularly where cataloguing is likely to be based on the content of the header, it is advisable to use generally recognized authority lists for the exact form of personal names. |
| Example | <editor>
<persName ref="names.xml#khawkins.tvt">Kevin Hawkins</persName>
</editor> |
| Content model |
<content>
<macroRef key="macro.phraseSeq"/>
</content>
|
| Schema Declaration |
element editor { lib1_att.global.attributes, lib1_macro.phraseSeq } |
| <editorialDecl> (editorial practice declaration) provides details of editorial principles and practices applied during the encoding of a text. [2.3.3. The Editorial Practices Declaration 2.3. The Encoding Description 15.3.2. Declarable Elements] | |
| Module | header — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Contained by | header: encodingDesc |
| May contain | |
| Example | <editorialDecl>
<p>Metadata in the TEI header comes from an AACR2-conformant
record, translated to TEI via the <name type="software">Thutmose I</name> program.</p>
<p>Content originally generated by <name type="software">c-n-rite</name> OCR software, then the
needed TEI encoding put in place with <name type="software">cnr2tei.xslt</name>.</p>
<correction method="markup" status="low"/>
<normalization method="silent">
<p>Spacing between words and the following
punctuation mark has been removed. Spacing
between words has generally been regularized to
one space.</p>
</normalization>
<normalization method="markup">
<p>Distances expressed in imperial units in the
source have been normalized to the metric system
using the attributes of the <gi>measure</gi>
element.</p>
</normalization>
<hyphenation eol="all">
<p>All hyphens in source document encoded as U+2010.</p>
</hyphenation>
</editorialDecl> |
| Content model |
<content>
<sequence minOccurs="1" maxOccurs="1">
<elementRef key="correction"
minOccurs="0" maxOccurs="1"/>
<elementRef key="hyphenation"
minOccurs="0" maxOccurs="1"/>
<elementRef key="normalization"
minOccurs="0" maxOccurs="1"/>
<elementRef key="punctuation"
minOccurs="0" maxOccurs="1"/>
<elementRef key="quotation" minOccurs="0"
maxOccurs="1"/>
<classRef key="model.pLike" minOccurs="0"
maxOccurs="6"/>
</sequence>
</content>
|
| Schema Declaration |
element editorialDecl
{
lib1_att.global.attributes,
(
lib1_correction?,
lib1_hyphenation?,
lib1_normalization?,
lib1_punctuation?,
lib1_quotation?,
(
lib1_model.pLike?,
(
lib1_model.pLike,
(
lib1_model.pLike,
(
lib1_model.pLike,
(
lib1_model.pLike,
( lib1_model.pLike, lib1_model.pLike? )?
)?
)?
)?
)?
)
)
} |
| <encodingDesc> (encoding description) documents the relationship between an electronic text and the source or sources from which it was derived. [2.3. The Encoding Description 2.1.1. The TEI Header and Its Components] | |
| Module | header — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Contained by | header: teiHeader |
| May contain | |
| Example | <encodingDesc>
<p>Basic encoding, capturing lexical information only. All
hyphenation, punctuation, and variant spellings normalized. No
formatting or layout information preserved.</p>
</encodingDesc> |
| Content model |
<content>
<sequence minOccurs="1" maxOccurs="1">
<elementRef key="projectDesc"
minOccurs="0" maxOccurs="1"/>
<elementRef key="schemaRef" minOccurs="0"
maxOccurs="unbounded"/>
<elementRef key="editorialDecl"
minOccurs="1" maxOccurs="1"/>
<elementRef key="tagsDecl" minOccurs="1"
maxOccurs="1"/>
<elementRef key="classDecl" minOccurs="0"
maxOccurs="1"/>
<elementRef key="appInfo" minOccurs="0"
maxOccurs="1"/>
</sequence>
</content>
|
| Schema Declaration |
element encodingDesc
{
lib1_att.global.attributes,
(
lib1_projectDesc?,
lib1_schemaRef*,
lib1_editorialDecl,
lib1_tagsDecl,
lib1_classDecl?,
lib1_appInfo?
)
} |
| <facsimile> contains a representation of some written source in the form of a set of images rather than as transcribed or encoded text. [11.1. Digital Facsimiles] | |
| Module | transcr — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Contained by | — |
| May contain | transcr: surface |
| Example | <facsimile>
<graphic url="page1.png"/>
<surface>
<graphic url="page2-highRes.png"/>
<graphic url="page2-lowRes.png"/>
</surface>
<graphic url="page3.png"/>
<graphic url="page4.png"/>
</facsimile> |
| Example | <facsimile>
<surface ulx="0" uly="0" lrx="200" lry="300">
<graphic url="Bovelles-49r.png"/>
</surface>
</facsimile> |
| Content model |
<content>
<elementRef key="surface" minOccurs="1"
maxOccurs="unbounded"/>
</content>
|
| Schema Declaration |
element facsimile { lib1_att.global.attributes, lib1_surface+ } |
| <graphic> indicates the location of a graphic or illustration, either forming part of a text, or providing an image of it. [3.9. Graphics and Other Non-textual Components 11.1. Digital Facsimiles] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.media (@width, @height, @scale) (att.internetMedia (@mimeType)) att.resourced (@url) |
| Member of | |
| Contained by | |
| May contain | Empty element |
| Note | The mimeType attribute should be used to supply the MIME media type of the image specified by the url attribute. Within the body of a text, a <graphic> element indicates the presence of a graphic component in the source itself. Within the context of a <facsimile> or <sourceDoc> element, however, a <graphic> element provides an additional digital representation of some part of the source being encoded. |
| Example | <figure>
<graphic url="fig1.png"/>
<head>Figure One: The View from the Bridge</head>
<figDesc>A Whistleresque view showing four or five sailing boats in the foreground, and a
series of buoys strung out between them.</figDesc>
</figure> |
| Example | <facsimile>
<surfaceGrp n="leaf1">
<surface>
<graphic url="page1.png"/>
</surface>
<surface>
<graphic url="page2-highRes.png"/>
<graphic url="page2-lowRes.png"/>
</surface>
</surfaceGrp>
</facsimile> |
| Content model |
<content/>
|
| Schema Declaration |
element graphic
{
lib1_att.global.attributes,
lib1_att.media.attributes,
lib1_att.resourced.attributes,
empty
} |
| <hyphenation> summarizes the way in which hyphenation in a source text has been treated in an encoded version of it. [2.3.3. The Editorial Practices Declaration 15.3.2. Declarable Elements] | |||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source))
| ||||||||
| Contained by | header: editorialDecl | ||||||||
| May contain | |||||||||
| Example | <hyphenation eol="some">
<p>End-of-line hyphenation silently removed where appropriate</p>
</hyphenation> | ||||||||
| Content model |
<content>
<alternate minOccurs="1" maxOccurs="1">
<sequence minOccurs="1" maxOccurs="1">
<elementRef key="hyphenation-para"
minOccurs="1" maxOccurs="1"/>
<elementRef key="p" minOccurs="0"
maxOccurs="unbounded"/>
</sequence>
<sequence minOccurs="1" maxOccurs="1">
<elementRef key="p" minOccurs="1"
maxOccurs="unbounded"/>
</sequence>
</alternate>
</content>
| ||||||||
| Schema Declaration |
element hyphenation
{
lib1_att.global.attributes,
attribute eol { "all" | "some" | "hard" | "none" }?,
( ( lib1_hyphenation-para, lib1_p* ) | ( lib1_p+ ) )
} | ||||||||
| <idno> (identifier) supplies any form of identifier used to identify some object, such as a bibliographic item, a person, a title, an organization, etc. in a standardized way. [2.2.4. Publication, Distribution, Licensing, etc. 2.2.5. The Series Statement 3.11.2.4. Imprint, Size of a Document, and Reprint Information] | |||||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.sortable (@sortKey) att.datable (@calendar, @period) (att.datable.w3c (@when, @notBefore, @notAfter, @from, @to)) (att.datable.custom (@when-custom, @notBefore-custom, @notAfter-custom, @from-custom, @to-custom, @datingPoint, @datingMethod))
| ||||||||||
| Member of | |||||||||||
| Contained by | core: abbr addrLine address analytic author bibl biblScope citedRange date editor email emph expan foreign gloss item label monogr name note p pubPlace publisher q quote ref resp series street term textLang title | ||||||||||
| May contain | header: idno character data | ||||||||||
| Note | <idno> should be used for labels which identify an object or concept in a formal cataloguing system such as a database or an RDF store, or in a distributed system such as the World Wide Web. Some suggested values for type on <idno> are | ||||||||||
| Example | <idno type="ISBN">978-1-906964-22-1</idno>
<idno type="ISSN">0143-3385</idno>
<idno type="DOI">10.1000/123</idno>
<idno type="URI">http://www.worldcat.org/oclc/185922478</idno>
<idno type="URI">http://authority.nzetc.org/463/</idno>
<idno type="LT">Thomason Tract E.537(17)</idno>
<idno type="Wing">C695</idno>
<idno type="oldCat">
<g ref="#sym"/>345
</idno> In the last case, the identifier includes a non-Unicode character which is defined elsewhere by means of a <glyph> or <char> element referenced here as #sym. | ||||||||||
| Content model |
<content>
<alternate minOccurs="0"
maxOccurs="unbounded">
<textNode/>
<classRef key="model.gLike"/>
<elementRef key="idno"/>
</alternate>
</content>
| ||||||||||
| Schema Declaration |
element idno
{
lib1_att.global.attributes,
lib1_att.sortable.attributes,
lib1_att.datable.attributes,
attribute type
{
"ISBN"
| "ISSN"
| "DOI"
| "URI"
| "VIAF"
| "ESTC"
| "OCLC"
| "LC_call_number"
| "LCCN"
}?,
( text | lib1_model.gLike | lib1_idno )*
} | ||||||||||
| model.inter groups elements which can appear either within or between paragraph-like elements. [1.3. The TEI Class System] | |
| Module | tei — Level 1: Fully Automated Conversion and Encoding |
| Used by | |
| Members | model.biblLike[bibl biblStruct] model.egLike model.labelLike[label] model.listLike[list] model.oddDecl model.qLike[model.quoteLike[cit quote] q] model.stageLike |
| model.noteLike groups globally-available note-like elements. [3.8. Notes, Annotation, and Indexing] | |
| Module | tei — Level 1: Fully Automated Conversion and Encoding |
| Used by | |
| Members | note |
| <namespace> supplies the formal name of the namespace to which the elements documented by its children belong. [2.3.4. The Tagging Declaration] | |||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source))
| ||||||
| Contained by | header: tagsDecl | ||||||
| May contain | header: tagUsage | ||||||
| Example | <namespace name="http://www.tei-c.org/ns/1.0">
<tagUsage gi="hi" occurs="28" withId="2"> Used only to mark English words
italicized in the copy text </tagUsage>
</namespace> | ||||||
| Content model |
<content>
<elementRef key="tagUsage"/>
</content>
| ||||||
| Schema Declaration |
element namespace
{
lib1_att.global.attributes,
attribute name { text },
lib1_tagUsage
} | ||||||
| <note> contains a note or annotation. [3.8.1. Notes and Simple Annotation 2.2.6. The Notes Statement 3.11.2.8. Notes and Statement of Language 9.3.5.4. Notes within Entries] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.typed (@type) att.written (@hand) |
| Member of | |
| Contained by | core: biblStruct monogr header: notesStmt |
| May contain | |
| Example | In the following example, the translator has supplied a footnote containing an explanation of the term translated as "painterly": And yet it is not only
in the great line of Italian renaissance art, but even in the
painterly <note place="bottom" type="gloss"
resp="#MDMH">
<term xml:lang="de">Malerisch</term>. This word has, in the German, two
distinct meanings, one objective, a quality residing in the object,
the other subjective, a mode of apprehension and creation. To avoid
confusion, they have been distinguished in English as
<mentioned>picturesque</mentioned> and
<mentioned>painterly</mentioned> respectively.
</note> style of the
Dutch genre painters of the seventeenth century that drapery has this
psychological significance. For this example to be valid, the code MDMH must be defined elsewhere, for example by means of a responsibility statement in the associated TEI header:<respStmt xml:id="MDMH">
<resp>translation from German to English</resp>
<name>Hottinger, Marie Donald Mackie</name>
</respStmt> |
| Example | The global n attribute may be used to supply the symbol or number used to mark the note's point of attachment in the source text, as in the following example: Mevorakh b. Saadya's mother, the matriarch of the
family during the second half of the eleventh century, <note n="126" anchored="true"> The
alleged mention of Judah Nagid's mother in a letter from 1071 is, in fact, a reference to
Judah's children; cf. above, nn. 111 and 54. </note> is well known from Geniza documents
published by Jacob Mann. However, if notes are numbered in sequence and their numbering can be reconstructed automatically by processing software, it may well be considered unnecessary to record the note numbers. |
| Content model |
<content>
<macroRef key="macro.specialPara"/>
</content>
|
| Schema Declaration |
element note
{
lib1_att.global.attributes,
lib1_att.typed.attributes,
lib1_att.written.attributes,
lib1_macro.specialPara
} |
| <orgName> (organization name) contains an organizational name. [13.2.2. Organizational Names] | |
| Module | namesdates — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.personal (@full, @sort) att.typed (@type) |
| Member of | |
| Contained by | |
| May contain | |
| Example | About a year back, a question of considerable interest was agitated in the <orgName key="PAS1" type="voluntary">
<placeName key="PEN">Pennsyla.</placeName> Abolition Society
</orgName> [...] |
| Content model |
<content>
<macroRef key="macro.phraseSeq"/>
</content>
|
| Schema Declaration |
element orgName
{
lib1_att.global.attributes,
lib1_att.personal.attributes,
lib1_att.typed.attributes,
lib1_macro.phraseSeq
} |
| <pb> (page break) marks the start of a new page in a paginated document. [3.10.3. Milestone Elements] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.typed (@type) att.spanning (@spanTo) att.breaking (@break) att.edition (ed, @edRef) |
| Member of | |
| Contained by | |
| May contain | Empty element |
| Note | A <pb> element should appear at the start of the page which it identifies. The global n attribute indicates the number or other value associated with this page. This will normally be the page number or signature printed on it, since the physical sequence number is implicit in the presence of the <pb> element itself. The type attribute may be used to characterize the page break in any respect. The more specialized attributes break, ed, or edRef should be preferred when the intent is to indicate whether or not the page break is word-breaking, or to note the source from which it derives. |
| Example | Page numbers may vary in different editions of a text. <p> ... <pb n="145" ed="ed2"/>
<!-- Page 145 in edition "ed2" starts here --> ... <pb n="283" ed="ed1"/>
<!-- Page 283 in edition "ed1" starts here--> ... </p> |
| Example | A page break may be associated with a facsimile image of the page it introduces by means of the facs attribute <body>
<pb n="1" facs="page1.png"/>
<!-- page1.png contains an image of the page;
the text it contains is encoded here -->
<p>
<!-- ... -->
</p>
<pb n="2" facs="page2.png"/>
<!-- similarly, for page 2 -->
<p>
<!-- ... -->
</p>
</body> |
| Content model |
<content/>
|
| Schema Declaration |
element pb
{
lib1_att.global.attributes,
lib1_att.typed.attributes,
lib1_att.edition.attribute.edRef,
lib1_att.spanning.attributes,
lib1_att.breaking.attributes,
empty
} |
| <persName> (personal name) contains a proper noun or proper-noun phrase referring to a person, possibly including one or more of the person's forenames, surnames, honorifics, added names, etc. [13.2.1. Personal Names] | |
| Module | namesdates — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.personal (@full, @sort) att.typed (@type) |
| Member of | |
| Contained by | |
| May contain | |
| Example | <persName>
<forename>Edward</forename>
<forename>George</forename>
<surname type="linked">Bulwer-Lytton</surname>, <roleName>Baron Lytton of
<placeName>Knebworth</placeName>
</roleName>
</persName> |
| Content model |
<content>
<macroRef key="macro.phraseSeq"/>
</content>
|
| Schema Declaration |
element persName
{
lib1_att.global.attributes,
lib1_att.personal.attributes,
lib1_att.typed.attributes,
lib1_macro.phraseSeq
} |
| <ptr> (pointer) defines a pointer to another location. [3.6. Simple Links and Cross-References 16.1. Links] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.internetMedia (@mimeType) att.typed (@type) |
| Member of | |
| Contained by | |
| May contain | Empty element |
| Example | <ptr target="#p143 #p144"/>
<ptr target="http://www.tei-c.org"/>
<ptr cRef="1.3.4"/> |
| Schematron |
<s:report test="@target and @cRef">Only one of the
attributes @target and @cRef may be supplied on <s:name/>.</s:report> |
| Content model |
<content/>
|
| Schema Declaration |
element ptr
{
lib1_att.global.attributes,
lib1_att.internetMedia.attributes,
lib1_att.typed.attributes,
empty
} |
| <publicationStmt> (publication statement) groups information concerning the publication or distribution of an electronic or other text. [2.2.4. Publication, Distribution, Licensing, etc. 2.2. The File Description] | |
| Module | header — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Contained by | header: fileDesc |
| May contain | |
| Note | For normally published items, the specialized children elements (e.g. <publisher>) should be used. Paragraphs are permitted as an alternative for unusual cases like unpublished works. |
| Example | <publicationStmt>
<publisher>C. Muquardt </publisher>
<pubPlace>Bruxelles & Leipzig</pubPlace>
<date when="1846"/>
</publicationStmt> |
| Example | <publicationStmt>
<publisher>Chadwyck Healey</publisher>
<pubPlace>Cambridge</pubPlace>
<availability>
<p>Available under licence only</p>
</availability>
<date when="1992">1992</date>
</publicationStmt> |
| Schematron |
<s:report test="child::tei:p">Use of
specialized child elements of the
publication statement (rather than
paragraphs) is recommended whenever
possible</s:report> |
| Schematron |
<s:rule context="tei:publicationStmt/tei:date">
<s:assert test="@when">Dates inside the
publication statement should have @when
(and should not have content)</s:assert>
<s:report test="string-length( normalize-space(.) ) > 0">Dates
inside the publication statement should
not have content (and should have
@when)</s:report>
</s:rule> |
| Content model |
<content>
<alternate minOccurs="1" maxOccurs="1">
<sequence minOccurs="1"
maxOccurs="unbounded">
<classRef key="model.publicationStmtPart.agency"/>
<classRef key="model.publicationStmtPart.detail"
minOccurs="0" maxOccurs="unbounded"/>
</sequence>
<classRef key="model.pLike" minOccurs="1"
maxOccurs="unbounded"/>
</alternate>
</content>
|
| Schema Declaration |
element publicationStmt
{
lib1_att.global.attributes,
(
(
lib1_model.publicationStmtPart.agency,
lib1_model.publicationStmtPart.detail*
)+
| lib1_model.pLike+
)
} |
| <ref> (reference) defines a reference to another location, possibly modified by additional text or comment. [3.6. Simple Links and Cross-References 16.1. Links] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.internetMedia (@mimeType) att.typed (@type) |
| Member of | |
| Contained by | |
| May contain | |
| Note | The target and cRef attributes are mutually exclusive. |
| Example | See especially <ref target="http://www.natcorp.ox.ac.uk/Texts/A02.xml#s2">the second
sentence</ref> |
| Example | See also <ref target="#locution">s.v. <term>locution</term>
</ref>. |
| Schematron |
<s:report test="@target and @cRef">Only one of the
attributes @target' and @cRef' may be supplied on <s:name/>
</s:report> |
| Content model |
<content>
<macroRef key="macro.paraContent"/>
</content>
|
| Schema Declaration |
element ref
{
lib1_att.global.attributes,
lib1_att.internetMedia.attributes,
lib1_att.typed.attributes,
lib1_macro.paraContent
} |
| <rendition> supplies information about the rendition or appearance of one or more elements in the source text. [2.3.4. The Tagging Declaration] | |||||||||||||||||||||||||||||||||||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||||||||||||||||||||||||||||||||||
| Attributes | Attributesatt.global (xml:id, @n, @xml:lang, @xml:space) att.global.rendition (@style) att.global.facs (@facs) att.global.change (@change) att.global.responsibility (@cert, @resp) att.global.source (@source) att.styleDef (scheme, @schemeVersion)
| ||||||||||||||||||||||||||||||||||||||||
| Contained by | header: tagsDecl | ||||||||||||||||||||||||||||||||||||||||
| May contain | |||||||||||||||||||||||||||||||||||||||||
| Example | <tagsDecl>
<rendition xml:id="r-center" scheme="css">text-align: center;</rendition>
<rendition xml:id="r-small" scheme="css">font-size: small;</rendition>
<rendition xml:id="r-large" scheme="css">font-size: large;</rendition>
<rendition xml:id="initcaps"
scope="first-letter" scheme="css">font-size: xx-large</rendition>
</tagsDecl> | ||||||||||||||||||||||||||||||||||||||||
| Content model |
<content>
<macroRef key="macro.limitedContent"/>
</content>
| ||||||||||||||||||||||||||||||||||||||||
| Schema Declaration |
element rendition
{
lib1_att.global.attribute.n,
lib1_att.global.attribute.xmllang,
lib1_att.global.attribute.xmlspace,
lib1_att.global.rendition.attribute.style,
lib1_att.global.facs.attribute.facs,
lib1_att.global.change.attribute.change,
lib1_att.global.responsibility.attribute.cert,
lib1_att.global.responsibility.attribute.resp,
lib1_att.global.source.attribute.source,
lib1_att.styleDef.attribute.schemeVersion,
attribute xml:id { text },
attribute scheme { "css" },
attribute scope { text }?,
attribute selector { text }?,
lib1_macro.limitedContent
} | ||||||||||||||||||||||||||||||||||||||||
| <respStmt> (statement of responsibility) supplies a statement of responsibility for the intellectual content of a text, edition, recording, or series, where the specialized elements for authors, editors, etc. do not suffice or do not apply. May also be used to encode information about individuals or organizations which have played a role in the production or distribution of a bibliographic work. [3.11.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement 2.2.2. The Edition Statement 2.2.5. The Series Statement] | |
| Module | core — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.canonical (@key, @ref) |
| Member of | |
| Contained by | header: editionStmt seriesStmt titleStmt |
| May contain | |
| Example | <respStmt>
<resp>transcribed from original ms</resp>
<persName>Claus Huitfeldt</persName>
</respStmt> |
| Example | <respStmt>
<resp>converted to XML encoding</resp>
<name>Alan Morrison</name>
</respStmt> |
| Content model |
<content>
<sequence minOccurs="1" maxOccurs="1">
<elementRef minOccurs="1" maxOccurs="1"
key="resp"/>
<classRef minOccurs="1"
maxOccurs="unbounded" key="model.nameLike.agent"/>
</sequence>
</content>
|
| Schema Declaration |
element respStmt
{
lib1_att.global.attributes,
lib1_att.canonical.attributes,
( lib1_resp, lib1_model.nameLike.agent+ )
} |
| <schemaRef> (schema reference) describes or points to a related customization or schema file [2.3.9. The Schema Specification] | |||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.typed (@type) att.resourced (@url)
| ||||||||
| Contained by | header: encodingDesc | ||||||||
| May contain | Empty element | ||||||||
| Example | <schemaRef type="interchangeODD"
url="http://www.tei-c.org/release/xml/tei/custom/odd/tei_lite.odd"/>
<schemaRef type="interchangeRNG"
url="http://www.tei-c.org/release/xml/tei/custom/odd/tei_lite.rng"/>
<schemaRef type="projectODD"
url="file:///schema/project.odd"/> | ||||||||
| Content model |
<content>
<classRef key="model.descLike"
minOccurs="0"/>
</content>
| ||||||||
| Schema Declaration |
element schemaRef
{
lib1_att.global.attributes,
lib1_att.typed.attributes,
lib1_att.resourced.attributes,
attribute key
{
"BPTL-L1-v3.4.1a"
| "BPTL-L2-v3.4.1a"
| "BPTL-L3-v3.4.1a"
| "BPTL-L4-v3.4.1a"
| "BPTL-L5-v3.4.1a"
}?,
lib1_model.descLike?
} | ||||||||
| <sourceDesc> (source description) describes the source from which an electronic text was derived or generated, typically a bibliographic description in the case of a digitized text, or a phrase such as "born digital" for a text which has no previous existence. [2.2.7. The Source Description] | |
| Module | header — Level 1: Fully Automated Conversion and Encoding |
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) |
| Contained by | header: fileDesc |
| May contain | core: biblStruct |
| Example | <sourceDesc>
<bibl>
<title level="a">The Interesting story of the Children in the Wood</title>. In
<author>Victor E Neuberg</author>, <title>The Penny Histories</title>.
<publisher>OUP</publisher>
<date>1968</date>. </bibl>
</sourceDesc> |
| Example | <sourceDesc>
<p>Born digital: no previous source exists.</p>
</sourceDesc> |
| Content model |
<content>
<elementRef key="biblStruct"/>
</content>
|
| Schema Declaration |
element sourceDesc { lib1_att.global.attributes, lib1_biblStruct } |
| <surface> defines a written surface as a two-dimensional coordinate space, optionally grouping one or more graphic representations of that space, zones of interest within that space, and transcriptions of the writing within them. [11.1. Digital Facsimiles 11.2.2. Embedded Transcription] | |||||||||||||||
| Module | transcr — Level 1: Fully Automated Conversion and Encoding | ||||||||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.typed (@type)
| ||||||||||||||
| Contained by | transcr: facsimile | ||||||||||||||
| May contain | core: graphic | ||||||||||||||
| Note | The <surface> element represents any two-dimensional space on some physical surface forming part of the source material, such as a piece of paper, a face of a monument, a billboard, a scroll, a leaf etc. The coordinate space defined by this element may be thought of as a grid lrx - ulx units wide and uly - lry units high. The <surface> element may contain graphic representations or transcriptions of written zones, or both. The coordinate values used by every <zone> element contained by this element are to be understood with reference to the same grid. Where it is useful or meaningful to do so, any grouping of multiple <surface> elements may be indicated using the <surfaceGrp> elements. | ||||||||||||||
| Example | <facsimile>
<surface ulx="0" uly="0" lrx="200" lry="300">
<graphic url="Bovelles-49r.png"/>
</surface>
</facsimile> | ||||||||||||||
| Content model |
<content>
<elementRef key="graphic"/>
</content>
| ||||||||||||||
| Schema Declaration |
element surface
{
lib1_att.global.attributes,
lib1_att.typed.attributes,
attribute attachment { text }?,
attribute flipping { text }?,
lib1_graphic
} | ||||||||||||||
| <tagUsage> documents the usage of a specific element within a specified document. [2.3.4. The Tagging Declaration] | |||||||||||||||||||||||||||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||||||||||||||||||||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source))
| ||||||||||||||||||||||||||||||||
| Contained by | header: namespace | ||||||||||||||||||||||||||||||||
| May contain | Empty element | ||||||||||||||||||||||||||||||||
| Example | <tagsDecl partial="true">
<rendition xml:id="it" scheme="css"
selector="foreign hi"> font-style: italic; </rendition>
<!-- ... -->
<namespace name="http://www.tei-c.org/ns/1.0">
<tagUsage gi="hi" occurs="28" withId="2"> Used to mark English words italicized in the copy text.</tagUsage>
<tagUsage gi="foreign">Used to mark non-English words in the copy text.</tagUsage>
<!-- ... -->
</namespace>
</tagsDecl> | ||||||||||||||||||||||||||||||||
| Example | <tagsDecl>
<!-- deprecated usage -->
<rendition xml:id="dit">Render using a slant or italic variant on the current font</rendition>
<!-- ... -->
<namespace name="http://www.tei-c.org/ns/1.0">
<tagUsage gi="hi" occurs="28" withId="2"
render="#dit"> Used to mark English words
italicized in the copy text.</tagUsage>
<tagUsage gi="foreign" render="#dit">Used to mark non-English words in the copy text.</tagUsage>
<!-- ... -->
</namespace>
</tagsDecl> | ||||||||||||||||||||||||||||||||
| Content model |
<content>
<valList type="closed">
<valItem ident="Unnumbered divs used."/>
<valItem ident="Numbered divs used."/>
</valList>
</content>
Legal values are:
| ||||||||||||||||||||||||||||||||
| Schema Declaration |
element tagUsage
{
lib1_att.global.attributes,
attribute gi { "div" | "div1" }
>>
tei:constraintSpec
[
scheme = "isoschematron"
ident = "numbered-vs-unnumbered"
" "
" A single TEI in Libraries document should not mix numbered and unnumbered divisions."
" "
" "
""" The use of divisions (i.e., whether numbered or unnumbered divisions are used) should be documented in a <tagUsage> element by "Unnumbered divs used." or "Numbered divs used." The <tagUsage> element must be the child of a <namespace name="http://www.tei-c.org/ns/1.0"> element."""
" "
" "
""" A document that uses un-numbered divisions should specify so by using <tagUsage gi="div">Unnumbered divs used.</tagUsage>; a document that uses numbered divisions should specify so by using <tagUsage gi="div1">Numbered divs used.</tagUsage>."""
],
attribute occurs { text }?,
attribute withId { text }?,
attribute render { list { + } }?,
( "Unnumbered divs used." | "Numbered divs used." )
}Legal values are:
| ||||||||||||||||||||||||||||||||
| <tagsDecl> (tagging declaration) provides detailed information about the tagging applied to a document. [2.3.4. The Tagging Declaration 2.3. The Encoding Description] | |||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source))
| ||||||||
| Contained by | header: encodingDesc | ||||||||
| May contain | |||||||||
| Example | <tagsDecl partial="true">
<rendition xml:id="rend-it" scheme="css"
selector="emph hi name title">font-style: italic;</rendition>
<namespace name="http://www.tei-c.org/ns/1.0">
<tagUsage gi="hi" occurs="467"/>
<tagUsage gi="title" occurs="45"/>
</namespace>
<namespace name="http://docbook.org/ns/docbook">
<tagUsage gi="para" occurs="10"/>
</namespace>
</tagsDecl> If the partial attribute were not specified here, the implication would be that the document in question contains only <hi>, <title>, and <para> elements. | ||||||||
| Content model |
<content>
<sequence minOccurs="1" maxOccurs="1">
<elementRef key="rendition" minOccurs="0"
maxOccurs="unbounded"/>
<elementRef key="namespace"/>
</sequence>
</content>
| ||||||||
| Schema Declaration |
element tagsDecl
{
lib1_att.global.attributes,
attribute partial { text }?,
( lib1_rendition*, lib1_namespace )
} | ||||||||
| <taxonomy> defines a typology either implicitly, by means of a bibliographic citation, or explicitly by a structured taxonomy. [2.3.7. The Classification Declaration] | |||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||
| Attributes | Attributesatt.global (xml:id, @n, @xml:lang, @xml:space) att.global.rendition (@style) att.global.facs (@facs) att.global.change (@change) att.global.responsibility (@cert, @resp) att.global.source (@source)
| ||||||||
| Contained by | |||||||||
| May contain | core: bibl biblStruct gloss header: taxonomy | ||||||||
| Note | Nested taxonomies are common in many fields, so the <taxonomy> element can be nested. | ||||||||
| Example | <taxonomy xml:id="tax.b">
<bibl>Brown Corpus</bibl>
<category xml:id="tax.b.a">
<catDesc>Press Reportage</catDesc>
<category xml:id="tax.b.a1">
<catDesc>Daily</catDesc>
</category>
<category xml:id="tax.b.a2">
<catDesc>Sunday</catDesc>
</category>
<category xml:id="tax.b.a3">
<catDesc>National</catDesc>
</category>
<category xml:id="tax.b.a4">
<catDesc>Provincial</catDesc>
</category>
<category xml:id="tax.b.a5">
<catDesc>Political</catDesc>
</category>
<category xml:id="tax.b.a6">
<catDesc>Sports</catDesc>
</category>
</category>
<category xml:id="tax.b.d">
<catDesc>Religion</catDesc>
<category xml:id="tax.b.d1">
<catDesc>Books</catDesc>
</category>
<category xml:id="tax.b.d2">
<catDesc>Periodicals and tracts</catDesc>
</category>
</category>
</taxonomy> | ||||||||
| Example | <taxonomy>
<category xml:id="literature">
<catDesc>Literature</catDesc>
<category xml:id="poetry">
<catDesc>Poetry</catDesc>
<category xml:id="sonnet">
<catDesc>Sonnet</catDesc>
<category xml:id="shakesSonnet">
<catDesc>Shakespearean Sonnet</catDesc>
</category>
<category xml:id="petraSonnet">
<catDesc>Petrarchan Sonnet</catDesc>
</category>
</category>
<category xml:id="haiku">
<catDesc>Haiku</catDesc>
</category>
</category>
<category xml:id="drama">
<catDesc>Drama</catDesc>
</category>
</category>
<category xml:id="meter">
<catDesc>Metrical Categories</catDesc>
<category xml:id="feet">
<catDesc>Metrical Feet</catDesc>
<category xml:id="iambic">
<catDesc>Iambic</catDesc>
</category>
<category xml:id="trochaic">
<catDesc>trochaic</catDesc>
</category>
</category>
<category xml:id="feetNumber">
<catDesc>Number of feet</catDesc>
<category xml:id="pentameter">
<catDesc>>Pentameter</catDesc>
</category>
<category xml:id="tetrameter">
<catDesc>>Tetrameter</catDesc>
</category>
</category>
</category>
</taxonomy>
<!-- elsewhere in document -->
<lg ana="#shakesSonnet #iambic #pentameter">
<l>Shall I compare thee to a summer's day</l>
<!-- ... -->
</lg> | ||||||||
| Content model |
<content>
<alternate minOccurs="1" maxOccurs="1">
<alternate minOccurs="1" maxOccurs="1">
<alternate minOccurs="1"
maxOccurs="unbounded">
<elementRef key="category"/>
<elementRef key="taxonomy"/>
</alternate>
<sequence minOccurs="1" maxOccurs="1">
<alternate minOccurs="1"
maxOccurs="unbounded">
<classRef key="model.glossLike"/>
<classRef key="model.descLike"/>
</alternate>
<alternate minOccurs="0"
maxOccurs="unbounded">
<elementRef key="category"/>
<elementRef key="taxonomy"/>
</alternate>
</sequence>
</alternate>
<sequence minOccurs="1" maxOccurs="1">
<classRef key="model.biblLike"/>
<alternate minOccurs="0"
maxOccurs="unbounded">
<elementRef key="category"/>
<elementRef key="taxonomy"/>
</alternate>
</sequence>
</alternate>
</content>
| ||||||||
| Schema Declaration |
element taxonomy
{
lib1_att.global.attribute.n,
lib1_att.global.attribute.xmllang,
lib1_att.global.attribute.xmlspace,
lib1_att.global.rendition.attribute.style,
lib1_att.global.facs.attribute.facs,
lib1_att.global.change.attribute.change,
lib1_att.global.responsibility.attribute.cert,
lib1_att.global.responsibility.attribute.resp,
lib1_att.global.source.attribute.source,
attribute xml:id { text },
(
(
( category | lib1_taxonomy )+
| (
( lib1_model.glossLike | lib1_model.descLike )+,
( category | lib1_taxonomy )*
)
)
| ( lib1_model.biblLike, ( category | lib1_taxonomy )* )
)
} | ||||||||
| <teiHeader> (TEI header) supplies descriptive and declarative metadata associated with a digital resource or set of resources. [2.1.1. The TEI Header and Its Components 15.1. Varieties of Composite Text] | |||||||||
| Module | header — Level 1: Fully Automated Conversion and Encoding | ||||||||
| Attributes | Attributesatt.global (xml:lang, @xml:id, @n, @xml:space) att.global.rendition (@style) att.global.facs (@facs) att.global.change (@change) att.global.responsibility (@cert, @resp) att.global.source (@source)
| ||||||||
| Contained by | textstructure: TEI | ||||||||
| May contain | header: encodingDesc fileDesc profileDesc revisionDesc | ||||||||
| Note | One of the few elements unconditionally required in any TEI document. | ||||||||
| Example | <teiHeader>
<fileDesc>
<titleStmt>
<title>Shakespeare: the first folio (1623) in electronic form</title>
<author>Shakespeare, William (1564–1616)</author>
<respStmt>
<resp>Originally prepared by</resp>
<name>Trevor Howard-Hill</name>
</respStmt>
<respStmt>
<resp>Revised and edited by</resp>
<name>Christine Avern-Carr</name>
</respStmt>
</titleStmt>
<publicationStmt>
<distributor>Oxford Text Archive</distributor>
<address>
<addrLine>13 Banbury Road, Oxford OX2 6NN, UK</addrLine>
</address>
<idno type="OTA">119</idno>
<availability>
<p>Freely available on a non-commercial basis.</p>
</availability>
<date when="1968">1968</date>
</publicationStmt>
<sourceDesc>
<bibl>The first folio of Shakespeare, prepared by Charlton Hinman (The Norton Facsimile,
1968)</bibl>
</sourceDesc>
</fileDesc>
<encodingDesc>
<projectDesc>
<p>Originally prepared for use in the production of a series of old-spelling
concordances in 1968, this text was extensively checked and revised for use during the
editing of the new Oxford Shakespeare (Wells and Taylor, 1989).</p>
</projectDesc>
<editorialDecl>
<correction>
<p>Turned letters are silently corrected.</p>
</correction>
<normalization>
<p>Original spelling and typography is retained, except that long s and ligatured
forms are not encoded.</p>
</normalization>
</editorialDecl>
<refsDecl xml:id="ASLREF">
<cRefPattern matchPattern="(\S+) ([^.]+)\.(.*)"
replacementPattern="#xpath(//div1[@n='$1']/div2/[@n='$2']//lb[@n='$3'])">
<p>A reference is created by assembling the following, in the reverse order as that
listed here: <list>
<item>the <att>n</att> value of the preceding <gi>lb</gi>
</item>
<item>a period</item>
<item>the <att>n</att> value of the ancestor <gi>div2</gi>
</item>
<item>a space</item>
<item>the <att>n</att> value of the parent <gi>div1</gi>
</item>
</list>
</p>
</cRefPattern>
</refsDecl>
</encodingDesc>
<revisionDesc>
<list>
<item>
<date when="1989-04-12">12 Apr 89</date> Last checked by CAC</item>
<item>
<date when="1989-03-01">1 Mar 89</date> LB made new file</item>
</list>
</revisionDesc>
</teiHeader> | ||||||||
| Schematron |
<s:report test=".//tei:ab">Use <gi>p</gi> instead of <gi>ab</gi> in the TEI header. (There are <s:value-of select="count(.//tei:ab)"/>
<gi>ab</gi> elements in this header.)</s:report> | ||||||||
| Content model |
<content>
<sequence minOccurs="1" maxOccurs="1">
<elementRef key="fileDesc" minOccurs="1"
maxOccurs="1"/>
<elementRef key="encodingDesc"
minOccurs="1" maxOccurs="1"/>
<elementRef key="profileDesc"
minOccurs="0" maxOccurs="1"/>
<elementRef key="revisionDesc"
minOccurs="0" maxOccurs="1"/>
</sequence>
</content>
| ||||||||
| Schema Declaration |
element teiHeader
{
lib1_att.global.attribute.xmlid,
lib1_att.global.attribute.n,
lib1_att.global.attribute.xmlspace,
lib1_att.global.rendition.attribute.style,
lib1_att.global.facs.attribute.facs,
lib1_att.global.change.attribute.change,
lib1_att.global.responsibility.attribute.cert,
lib1_att.global.responsibility.attribute.resp,
lib1_att.global.source.attribute.source,
attribute xml:lang { text },
( lib1_fileDesc, lib1_encodingDesc, lib1_profileDesc?, lib1_revisionDesc? )
} | ||||||||
| <title> contains a title for any kind of work. [3.11.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement 2.2.5. The Series Statement] | |||||||||||||||||||||
| Module | core — Level 1: Fully Automated Conversion and Encoding | ||||||||||||||||||||
| Attributes | Attributes att.global (@xml:id, @n, @xml:lang, @xml:space) (att.global.rendition (@style)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.canonical (@key, @ref) att.datable (@calendar, @period) (att.datable.w3c (@when, @notBefore, @notAfter, @from, @to)) (att.datable.custom (@when-custom, @notBefore-custom, @notAfter-custom, @from-custom, @to-custom, @datingPoint, @datingMethod))
| ||||||||||||||||||||
| Member of | |||||||||||||||||||||
| Contained by | |||||||||||||||||||||
| May contain | |||||||||||||||||||||
| Note | The attributes key and ref, inherited from the class att.canonical may be used to indicate the canonical form for the title; the former, by supplying (for example) the identifier of a record in some external library system; the latter by pointing to an XML element somewhere containing the canonical form of the title. | ||||||||||||||||||||
| Example | <title>Information Technology and the Research Process: Proceedings of
a conference held at Cranfield Institute of Technology, UK,
18–21 July 1989</title> | ||||||||||||||||||||
| Example | <title>Hardy's Tess of the D'Urbervilles: a machine readable
edition</title> | ||||||||||||||||||||
| Example | <title type="full">
<title type="main">Synthèse</title>
<title type="sub">an international journal for
epistemology, methodology and history of
science</title>
</title> | ||||||||||||||||||||
| Content model |
<content>
<macroRef key="macro.paraContent"/>
</content>
| ||||||||||||||||||||
| Schema Declaration |
element title
{
lib1_att.global.attributes,
lib1_att.canonical.attributes,
lib1_att.datable.attributes,
attribute type
{
"main"
| "sub"
| "alt"
| "short"
| "desc"
| "translated"
| "marc245a"
| "marc245b"
| "marc245c"
| "uniform"
}?
>>
tei:constraintSpec
[
scheme = "isoschematron"
ident = "titleType"
" "
"Inside the title statment the @type of a <title> should be specified"
" "
" "
"Inside a structured bibliographic citation of a mongraphic-level item, @type of a <title> should be specified"
" "
" "
"Inside the analytic portion of a structured bibliographic citation, @type of a <title> should be specified"
" "
" "
"Inside a bibliographic citation of a related item, the @type of a <title> should be specified"
],
attribute level { "a" | "m" | "j" | "s" | "u" }?
>>
tei:constraintSpec
[
scheme = "isoschematron"
ident = "titleLevel"
" "
"The @level attribute should not be specified on a <title> within the <titleStmt>."
" "
" "
"""When a child of <seriesStmt>, the level of a title should be specified as 's'."""
" "
" "
"""When inside the series-level portion of a structured bibliographic citation, the level of a title should be specified as 's'."""
" "
" "
"""When a child of <analytic>, the level of a title should be specified as 'a'."""
" "
" "
"""When a child of <monogr>, the level of a title should not be specified as 'a'."""
],
lib1_macro.paraContent
} | ||||||||||||||||||||
| abbr: (abbreviation) contains an abbreviation of any sort. [3.5.5. Abbreviations and Their Expansions] |
| addrLine: (address line) contains one line of a postal address. [3.5.2. Addresses 2.2.4. Publication, Distribution, Licensing, etc. 3.11.2.4. Imprint, Size of a Document, and Reprint Information] |
| address: contains a postal address, for example of a publisher, an organization, or an individual. [3.5.2. Addresses 2.2.4. Publication, Distribution, Licensing, etc. 3.11.2.4. Imprint, Size of a Document, and Reprint Information] |
| analytic: (analytic level) contains bibliographic elements describing an item (e.g. an article or poem) published within a monograph or journal and not as an independent publication. [3.11.2.1. Analytic, Monographic, and Series Levels] |
| appInfo: (application information) records information about an application which has edited the TEI file. [2.3.10. The Application Information Element] |
| application: provides information about an application which has acted upon the document. [2.3.10. The Application Information Element] |
| att: (attribute) contains the name of an attribute appearing within running text. [22. Documentation Elements] |
| att.ascribed: provides attributes for elements representing speech or action that can be ascribed to a specific individual. [3.3.3. Quotation 8.3. Elements Unique to Spoken Texts] |
| att.breaking: provides an attribute to indicate whether or not the element concerned is considered to mark the end of an orthographic token in the same way as whitespace. [3.10.3. Milestone Elements] |
| att.cReferencing: provides an attribute which may be used to supply a canonical reference as a means of identifying the target of a pointer. |
| att.canonical: provides attributes which can be used to associate a representation such as a name or title with canonical information about the object being named or referenced. |
| att.citing: provides attributes for specifying the specific part of a bibliographic item being cited. [1.3.1. Attribute Classes] |
| att.datable: provides attributes for normalization of elements that contain dates, times, or datable events. [3.5.4. Dates and Times 13.3.6. Dates and Times] |
| att.datable.custom: provides attributes for normalization of elements that contain datable events to a custom dating system (i.e. other than the Gregorian used by W3 and ISO). [13.3.6. Dates and Times] |
| att.datable.w3c: provides attributes for normalization of elements that contain datable events conforming to the W3C XML Schema Part 2: Datatypes Second Edition. [3.5.4. Dates and Times 13.3.6. Dates and Times] |
| att.docStatus: provides attributes for use on metadata elements describing the status of a document. |
| att.edition: provides attributes identifying the source edition from which some encoded feature derives. |
| att.fragmentable: provides an attribute for representing fragmentation of a structural element, typically as a consequence of some overlapping hierarchy. |
| att.global.change: supplies the change attribute, allowing its member elements to specify one or more states or revision campaigns with which they are associated. |
| att.global.facs: provides an attribute used to express correspondence between an element containing transcribed text and all or part of an image representing that text. [11.1. Digital Facsimiles] |
| att.global.responsibility: provides attributes indicating the agent responsible for some aspect of the text, the markup or something asserted by the markup, and the degree of certainty associated with it. [1.3.1.1.4. Sources, certainty, and responsibility 3.4. Simple Editorial Changes 11.3.2.2. Hand, Responsibility, and Certainty Attributes 17.3. Spans and Interpretations 13.1.1. Linking Names and Their Referents] |
| att.global.source: provides an attribute used by elements to point to an external source. [1.3.1.1.4. Sources, certainty, and responsibility 3.3.3. Quotation 8.3.4. Writing] |
| att.internetMedia: provides attributes for specifying the type of a computer resource using a standard taxonomy. |
| att.media: provides attributes for specifying display and related properties of external media. |
| att.personal: (attributes for components of names usually, but not necessarily, personal names) common attributes for those elements which form part of a name usually, but not necessarily, a personal name. [13.2.1. Personal Names] |
| att.resourced: provides attributes by which a resource (such as an externally held media file) may be located. |
| att.sortable: provides attributes for elements in lists or groups that are sortable, but whose sorting key cannot be derived mechanically from the element content. [9.1. Dictionary Body and Overall Structure] |
| att.spanning: provides attributes for elements which delimit a span of text by pointing mechanisms rather than by enclosing it. [11.3.1.4. Additions and Deletions 1.3.1. Attribute Classes] |
| att.styleDef: provides attributes to specify the name of a formal definition language used to provide formatting or rendition information. |
| att.timed: provides attributes common to those elements which have a duration in time, expressed either absolutely or by reference to an alignment map. [8.3.5. Temporal Information] |
| att.translatable: provides attributes used to indicate the status of a translatable portion of an ODD document. |
| att.written: provides an attribute to indicate the hand in which the textual content of an element was written in the source being transcribed. [1.3.1. Attribute Classes] |
| availability: supplies information about the availability of a text, for example any restrictions on its use or distribution, its copyright status, any licence applying to it, etc. [2.2.4. Publication, Distribution, Licensing, etc.] |
| bibl: (bibliographic citation) contains a loosely-structured bibliographic citation of which the sub-components may or may not be explicitly tagged. [3.11.1. Methods of Encoding Bibliographic References and Lists of References 2.2.7. The Source Description 15.3.2. Declarable Elements] |
| biblScope: (scope of bibliographic reference) defines the scope of a bibliographic reference, for example as a list of page numbers, or a named subdivision of a larger work. [3.11.2.5. Scopes and Ranges in Bibliographic Citations] |
| biblStruct: (structured bibliographic citation) contains a structured bibliographic citation, in which only bibliographic sub-elements appear and in a specified order. [3.11.1. Methods of Encoding Bibliographic References and Lists of References 2.2.7. The Source Description 15.3.2. Declarable Elements] |
| choice: groups a number of alternative encodings for the same point in a text. [3.4. Simple Editorial Changes] |
| cit: (cited quotation) contains a quotation from some other document, together with a bibliographic reference to its source. In a dictionary it may contain an example text with at least one occurrence of the word form, used in the sense being described, or a translation of the headword, or an example. [3.3.3. Quotation 4.3.1. Grouped Texts 9.3.5.1. Examples] |
| citedRange: (cited range) defines the range of cited content, often represented by pages or other units [3.11.2.5. Scopes and Ranges in Bibliographic Citations] |
| classCode: (classification code) contains the classification code used for this text in some standard classification system. [2.4.3. The Text Classification] |
| classDecl: (classification declarations) contains one or more taxonomies defining any classificatory codes used elsewhere in the text. [2.3.7. The Classification Declaration 2.3. The Encoding Description] |
| correction: (correction principles) states how and under what circumstances corrections have been made in the text. [2.3.3. The Editorial Practices Declaration 15.3.2. Declarable Elements] |
| date: contains a date in any format. [3.5.4. Dates and Times 2.2.4. Publication, Distribution, Licensing, etc. 2.6. The Revision Description 3.11.2.4. Imprint, Size of a Document, and Reprint Information 15.2.3. The Setting Description 13.3.6. Dates and Times] |
| distributor: supplies the name of a person or other agency responsible for the distribution of a text. [2.2.4. Publication, Distribution, Licensing, etc.] |
| edition: describes the particularities of one edition of a text. [2.2.2. The Edition Statement] |
| editionStmt: (edition statement) groups information relating to one edition of a text. [2.2.2. The Edition Statement 2.2. The File Description] |
| email: (electronic mail address) contains an email address identifying a location to which email messages can be delivered. [3.5.2. Addresses] |
| emph: (emphasized) marks words or phrases which are stressed or emphasized for linguistic or rhetorical effect. [3.3.2.2. Emphatic Words and Phrases 3.3.2. Emphasis, Foreign Words, and Unusual Language] |
| expan: (expansion) contains the expansion of an abbreviation. [3.5.5. Abbreviations and Their Expansions] |
| extent: describes the approximate size of a text stored on some carrier medium or of some other object, digital or non-digital, specified in any convenient units. [2.2.3. Type and Extent of File 2.2. The File Description 3.11.2.4. Imprint, Size of a Document, and Reprint Information 10.7.1. Object Description] |
| fileDesc: (file description) contains a full bibliographic description of an electronic file. [2.2. The File Description 2.1.1. The TEI Header and Its Components] |
| foreign: identifies a word or phrase as belonging to some language other than that of the surrounding text. [3.3.2.1. Foreign Words or Expressions] |
| gi: (element name) contains the name (generic identifier) of an element. [22. Documentation Elements 22.5. Element Specifications] |
| gloss: identifies a phrase or word used to provide a gloss or definition for some other word or phrase. [3.3.4. Terms, Glosses, Equivalents, and Descriptions 22.4.1. Description of Components] |
| imprint: groups information relating to the publication or distribution of a bibliographic item. [3.11.2.4. Imprint, Size of a Document, and Reprint Information] |
| item: contains one component of a list. [3.7. Lists 2.6. The Revision Description] |
| keywords: contains a list of keywords or phrases identifying the topic or nature of a text. [2.4.3. The Text Classification] |
| label: contains any label or heading used to identify part of a text, typically but not exclusively in a list or glossary. [3.7. Lists] |
| langUsage: (language usage) describes the languages, sublanguages, registers, dialects, etc. represented within a text. [2.4.2. Language Usage 2.4. The Profile Description 15.3.2. Declarable Elements] |
| language: characterizes a single language or sublanguage used within a text. [2.4.2. Language Usage] |
| list: contains any sequence of items organized as a list. [3.7. Lists] |
| macro.limitedContent: (paragraph content) defines the content of prose elements that are not used for transcription of extant materials. [1.3. The TEI Class System] |
| macro.paraContent: (paragraph content) defines the content of paragraphs and similar elements. [1.3. The TEI Class System] |
| macro.phraseSeq: (phrase sequence) defines a sequence of character data and phrase-level elements. [1.4.1. Standard Content Models] |
| macro.phraseSeq.limited: (limited phrase sequence) defines a sequence of character data and those phrase-level elements that are not typically used for transcribing extant documents. [1.4.1. Standard Content Models] |
| macro.specialPara: ('special' paragraph content) defines the content model of elements such as notes or list items, which either contain a series of component-level elements or else have the same structure as a paragraph, containing a series of phrase-level and inter-level elements. [1.3. The TEI Class System] |
| media: indicates the location of any form of external media such as an audio or video clip etc. [3.9. Graphics and Other Non-textual Components] |
| model.addrPart: groups elements such as names or postal codes which may appear as part of a postal address. [3.5.2. Addresses] |
| model.addressLike: groups elements used to represent a postal or email address. [1. The TEI Infrastructure] |
| model.applicationLike: groups elements used to record application-specific information about a document in its header. |
| model.availabilityPart: groups elements such as licences and paragraphs of text which may appear as part of an availability statement [2.2.4. Publication, Distribution, Licensing, etc.] |
| model.biblLike: groups elements containing a bibliographic description. [3.11. Bibliographic Citations and References] |
| model.biblPart: groups elements which represent components of a bibliographic description. [3.11. Bibliographic Citations and References] |
| model.choicePart: groups elements (other than <choice> itself) which can be used within a <choice> alternation. [3.4. Simple Editorial Changes] |
| model.dateLike: groups elements containing temporal expressions. [3.5.4. Dates and Times 13.3.6. Dates and Times] |
| model.descLike: groups elements which contain a description of their function. |
| model.div1Like: groups top-level structural divisions. |
| model.divLike: groups elements used to represent un-numbered generic structural divisions. |
| model.divPart: groups paragraph-level elements appearing directly within divisions. [1.3. The TEI Class System] |
| model.egLike: groups elements containing examples or illustrations. [22.1.1. Phrase Level Terms] |
| model.emphLike: groups phrase-level elements which are typographically distinct and to which a specific function can be attributed. [3.3. Highlighting and Quotation] |
| model.entryPart: groups non-morphological elements appearing within a dictionary entry. [9.1. Dictionary Body and Overall Structure] |
| model.gLike: groups elements used to represent individual non-Unicode characters or glyphs. |
| model.global: groups elements which may appear at any point within a TEI text. [1.3. The TEI Class System] |
| model.global.edit: groups globally available elements which perform a specifically editorial function. [1.3. The TEI Class System] |
| model.global.meta: groups globally available elements which describe the status of other elements. [1.3. The TEI Class System] |
| model.glossLike: groups elements which provide an alternative name, explanation, or description for any markup construct. |
| model.graphicLike: groups elements containing images, formulae, and similar objects. [3.9. Graphics and Other Non-textual Components] |
| model.hiLike: groups phrase-level elements which are typographically distinct but to which no specific function can be attributed. [3.3. Highlighting and Quotation] |
| model.highlighted: groups phrase-level elements which are typographically distinct. [3.3. Highlighting and Quotation] |
| model.imprintPart: groups the bibliographic elements which occur inside imprints. [3.11. Bibliographic Citations and References] |
| model.lLike: groups elements representing metrical components such as verse lines. |
| model.lPart: groups phrase-level elements which may appear within verse only. [6.2. Components of the Verse Line] |
| model.labelLike: groups elements used to gloss or explain other parts of a document. |
| model.limitedPhrase: groups phrase-level elements excluding those elements primarily intended for transcription of existing sources. [1.3. The TEI Class System] |
| model.listLike: groups list-like elements. [3.7. Lists] |
| model.measureLike: groups elements which denote a number, a quantity, a measurement, or similar piece of text that conveys some numerical meaning. [3.5.3. Numbers and Measures] |
| model.milestoneLike: groups milestone-style elements used to represent reference systems. [1.3. The TEI Class System 3.10.3. Milestone Elements] |
| model.nameLike: groups elements which name or refer to a person, place, or organization. |
| model.nameLike.agent: groups elements which contain names of individuals or corporate bodies. [3.5. Names, Numbers, Dates, Abbreviations, and Addresses] |
| model.oddDecl: groups elements which generate declarations in some markup language in ODD documents. |
| model.offsetLike: groups elements which can appear only as part of a place name. [13.2.3. Place Names] |
| model.pLike: groups paragraph-like elements. |
| model.pPart.data: groups phrase-level elements containing names, dates, numbers, measures, and similar data. [3.5. Names, Numbers, Dates, Abbreviations, and Addresses] |
| model.pPart.edit: groups phrase-level elements for simple editorial correction and transcription. [3.4. Simple Editorial Changes] |
| model.pPart.editorial: groups phrase-level elements for simple editorial interventions that may be useful both in transcribing and in authoring. [3.4. Simple Editorial Changes] |
| model.pPart.msdesc: groups phrase-level elements used in manuscript description. [10. Manuscript Description] |
| model.pPart.transcriptional: groups phrase-level elements used for editorial transcription of pre-existing source materials. [3.4. Simple Editorial Changes] |
| model.persNamePart: groups elements which form part of a personal name. [13.2.1. Personal Names] |
| model.phrase: groups elements which can occur at the level of individual words or phrases. [1.3. The TEI Class System] |
| model.phrase.xml: groups phrase-level elements used to encode XML constructs such as element names, attribute names, and attribute values [22. Documentation Elements] |
| model.placeNamePart: groups elements which form part of a place name. [13.2.3. Place Names] |
| model.placeStateLike: groups elements which describe changing states of a place. |
| model.profileDescPart: groups elements which may be used inside <profileDesc> and appear multiple times. |
| model.ptrLike: groups elements used for purposes of location and reference. [3.6. Simple Links and Cross-References] |
| model.publicationStmtPart.agency: groups the child elements of a <publicationStmt> element of the TEI header that indicate an authorising agent. [2.2.4. Publication, Distribution, Licensing, etc.] |
| model.publicationStmtPart.detail: groups the agency-specific child elements of the <publicationStmt> element of the TEI header. [2.2.4. Publication, Distribution, Licensing, etc.] |
| model.qLike: groups elements related to highlighting which can appear either within or between chunk-level elements. [3.3. Highlighting and Quotation] |
| model.quoteLike: groups elements used to directly contain quotations. |
| model.respLike: groups elements which are used to indicate intellectual or other significant responsibility, for example within a bibliographic element. |
| model.segLike: groups elements used for arbitrary segmentation. [16.3. Blocks, Segments, and Anchors 17.1. Linguistic Segment Categories] |
| model.specDescLike: groups elements for referring to specification elements. [22. Documentation Elements] |
| model.stageLike: groups elements containing stage directions or similar things defined by the module for performance texts. [7.3. Other Types of Performance Text] |
| monogr: (monographic level) contains bibliographic elements describing an item (e.g. a book or journal) published as an independent item (i.e. as a separate physical object). [3.11.2.1. Analytic, Monographic, and Series Levels] |
| name: (name, proper noun) contains a proper noun or noun phrase. [3.5.1. Referring Strings] |
| no-extent-in-fileDesc: |
| normalization: indicates the extent of normalization or regularization of the original source carried out in converting it to electronic form. [2.3.3. The Editorial Practices Declaration 15.3.2. Declarable Elements] |
| notesStmt: (notes statement) collects together any notes providing information about a text additional to that recorded in other parts of the bibliographic description. [2.2.6. The Notes Statement 2.2. The File Description] |
| onlyAllowedAttrs: |
| p: (paragraph) marks paragraphs in prose. [3.1. Paragraphs 7.2.5. Speech Contents] |
| postBox: (postal box or post office box) contains a number or other identifier for some postal delivery point other than a street address. [3.5.2. Addresses] |
| postCode: (postal code) contains a numerical or alphanumeric code used as part of a postal address to simplify sorting or delivery of mail. [3.5.2. Addresses] |
| profileDesc: (text-profile description) provides a detailed description of non-bibliographic aspects of a text, specifically the languages and sublanguages used, the situation in which it was produced, the participants and their setting. [2.4. The Profile Description 2.1.1. The TEI Header and Its Components] |
| projectDesc: (project description) describes in detail the aim or purpose for which an electronic file was encoded, together with any other relevant information concerning the process by which it was assembled or collected. [2.3.1. The Project Description 2.3. The Encoding Description 15.3.2. Declarable Elements] |
| pubPlace: (publication place) contains the name of the place where a bibliographic item was published. [3.11.2.4. Imprint, Size of a Document, and Reprint Information] |
| publisher: provides the name of the organization responsible for the publication or distribution of a bibliographic item. [3.11.2.4. Imprint, Size of a Document, and Reprint Information 2.2.4. Publication, Distribution, Licensing, etc.] |
| punctuation: specifies editorial practice adopted with respect to punctuation marks in the original. [2.3.3. The Editorial Practices Declaration 3.2. Treatment of Punctuation] |
| q: (quoted) contains material which is distinguished from the surrounding text using quotation marks or a similar method, for any one of a variety of reasons including, but not limited to: direct speech or thought, technical terms or jargon, authorial distance, quotations from elsewhere, and passages that are mentioned but not used. [3.3.3. Quotation] |
| quotation: specifies editorial practice adopted with respect to quotation marks in the original. [2.3.3. The Editorial Practices Declaration 15.3.2. Declarable Elements] |
| quote: (quotation) contains a phrase or passage attributed by the narrator or author to some agency external to the text. [3.3.3. Quotation 4.3.1. Grouped Texts] |
| relatedItem: contains or references some other bibliographic item which is related to the present one in some specified manner, for example as a constituent or alternative version of it. [3.11.2.7. Related Items] |
| resp: (responsibility) contains a phrase describing the nature of a person's intellectual responsibility, or an organization's role in the production or distribution of a work. [3.11.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement 2.2.2. The Edition Statement 2.2.5. The Series Statement] |
| revisionDesc: (revision description) summarizes the revision history for a file. [2.6. The Revision Description 2.1.1. The TEI Header and Its Components] |
| samplingDecl: (sampling declaration) contains a prose description of the rationale and methods used in sampling texts in the creation of a corpus or collection. [2.3.2. The Sampling Declaration 2.3. The Encoding Description 15.3.2. Declarable Elements] |
| series: (series information) contains information about the series in which a book or other bibliographic item has appeared. [3.11.2.1. Analytic, Monographic, and Series Levels] |
| seriesStmt: (series statement) groups information about the series, if any, to which a publication belongs. [2.2.5. The Series Statement 2.2. The File Description] |
| street: contains a full street address including any name or number identifying a building as well as the name of the street or route on which it is located. [3.5.2. Addresses] |
| tag: contains text of a complete start- or end-tag, possibly including attribute specifications, but excluding the opening and closing markup delimiter characters. [22. Documentation Elements] |
| teidata.certainty: defines the range of attribute values expressing a degree of certainty. |
| teidata.count: defines the range of attribute values used for a non-negative integer value used as a count. |
| teidata.duration.iso: defines the range of attribute values available for representation of a duration in time using ISO 8601 standard formats |
| teidata.duration.w3c: defines the range of attribute values available for representation of a duration in time using W3C datatypes. |
| teidata.enumerated: defines the range of attribute values expressed as a single XML name taken from a list of documented possibilities. |
| teidata.language: defines the range of attribute values used to identify a particular combination of human language and writing system. [6.1. Language Identification] |
| teidata.name: defines the range of attribute values expressed as an XML Name. |
| teidata.namespace: defines the range of attribute values used to indicate XML namespaces as defined by the W3C Namespaces in XML Technical Recommendation. |
| teidata.numeric: defines the range of attribute values used for numeric values. |
| teidata.outputMeasurement: defines a range of values for use in specifying the size of an object that is intended for display. |
| teidata.pattern: defines attribute values which are expressed as a regular expression. |
| teidata.pointer: defines the range of attribute values used to provide a single URI, absolute or relative, pointing to some other resource, either within the current document or elsewhere. |
| teidata.probCert: defines a range of attribute values which can be expressed either as a numeric probability or as a coded certainty value. |
| teidata.probability: defines the range of attribute values expressing a probability. |
| teidata.replacement: defines attribute values which contain a replacement template. |
| teidata.temporal.w3c: defines the range of attribute values expressing a temporal expression such as a date, a time, or a combination of them, that conform to the W3C XML Schema Part 2: Datatypes Second Edition specification. |
| teidata.text: defines the range of attribute values used to express some kind of identifying string as a single sequence of unicode characters possibly including whitespace. |
| teidata.truthValue: defines the range of attribute values used to express a truth value. |
| teidata.unboundedInt: defines an attribute value which can be either any non-negative integer or the string "unbounded". |
| teidata.version: defines the range of attribute values which may be used to specify a TEI or Unicode version number. |
| teidata.versionNumber: defines the range of attribute values used for version numbers. |
| teidata.word: defines the range of attribute values expressed as a single word or token. |
| teidata.xmlName: defines attribute values which contain an XML name. |
| term: contains a single-word, multi-word, or symbolic designation which is regarded as a technical term. [3.3.4. Terms, Glosses, Equivalents, and Descriptions] |
| text: contains a single text of any kind, whether unitary or composite, for example a poem or drama, a collection of essays, a novel, a dictionary, or a corpus sample. [4. Default Text Structure 15.1. Varieties of Composite Text] |
| textClass: (text classification) groups information which describes the nature or topic of a text in terms of a standard classification scheme, thesaurus, etc. [2.4.3. The Text Classification] |
| textLang: (text language) describes the languages and writing systems identified within the bibliographic work being described, rather than its description. [3.11.2.4. Imprint, Size of a Document, and Reprint Information 10.6.6. Languages and Writing Systems] |
| titleStmt: (title statement) groups information about the title of a work and those responsible for its content. [2.2.1. The Title Statement 2.2. The File Description] |
| val: (value) contains a single attribute value. [22. Documentation Elements 22.5.4. Attribute List Specification] |
| when-or-before-after: |