<join>

<join> 텍스트를 구성하고 있는 비연소적 요소를 가리킴으로 텍스트의 파편화된 분절을 식별한다. [16.7 Aggregation]
모듈linking — Linking, Segmentation, and Alignment
속성att.global (@xml:id, @n, @xml:lang, @rend, @style, @rendition, @xml:base, @xml:space) (att.global.linking (@corresp, @synch, @sameAs, @copyOf, @next, @prev, @exclude, @select)) (att.global.analytic (@ana)) (att.global.facs (@facs)) (att.global.change (@change)) att.pointing (@targetLang, @target, @evaluate) att.typed (@type, @subtype)
targets가상 요소로 결합될 수 있는 요소 또는 단락의 확인소를 명시한다.
DeprecatedThis feature will be withdrawn after 2013-09-20
상태 수의적
자료 유형 2–∞ 출현 

<rng:ref name="data.pointer"/>
data.pointer
공백문자로 분리됨
two or more pointers (URIs), separated by whitespace
result이 집합체의 표상으로 이해될 수 있는 요소의 이름을 명시한다.
상태 수의적
자료 유형

<rng:ref name="data.name"/>
data.name
The generic identifier of an element in the current schema.
scope결합된 대상이 제시된 전체 요소(그 뿌리를 포함하는 전체 하부수형도) 또는 대상의 자식노드(하부수형도의 가지)의 포함 여부를 제시한다.
상태 권고적
자료 유형

<rng:ref name="data.enumerated"/>
data.enumerated
적법한 값은:
root
대상 속성에 의해 지시된 한 뿌리에 대한 하부수형도가 결합되고, 각 하부수형도는 결합에 의해 생성된 실제 요소의 자식 노드가 된다. [기본값]
branches
대상 속성에 의해 지시된 하부수형도의 자식은 실제 요소의 자식이 된다.(즉, 하부수형도의 뿌리는 없어진다)
클럽 회원
에 의해 포함된
analysis: cl m phr s span w
figures: cell figure table
linking: ab joinGrp seg
nets: graph
spoken: u writing
tagdocs: eg valDesc
textcrit: app lem rdg wit witDetail
verse: metSym rhyme
포함할 수 있다
선언

<rng:element name="join">
 <rng:ref name="att.global.attributes"/>
 <rng:ref name="att.global.linking.attributes"/>
 <rng:ref name="att.global.analytic.attributes"/>
 <rng:ref name="att.global.facs.attributes"/>
 <rng:ref name="att.global.change.attributes"/>
 <rng:ref name="att.pointing.attributes"/>
 <rng:ref name="att.typed.attributes"/>
 <rng:optional>
  <rng:attribute name="targets">
   <rng:list>
    <rng:ref name="data.pointer"/>
    <rng:ref name="data.pointer"/>
    <rng:zeroOrMore>
     <rng:ref name="data.pointer"/>
    </rng:zeroOrMore>
   </rng:list>
  </rng:attribute>
 </rng:optional>
 <rng:optional>
  <rng:attribute name="result">
   <rng:ref name="data.name"/>
  </rng:attribute>
 </rng:optional>
 <rng:optional>
  <rng:attribute name="scopea:defaultValue="root">
   <rng:choice>
    <rng:value>root</rng:value>
    <rng:value>branches</rng:value>
   </rng:choice>
  </rng:attribute>
 </rng:optional>
 <rng:zeroOrMore>
  <rng:choice>
   <rng:ref name="model.descLike"/>
   <rng:ref name="model.certLike"/>
  </rng:choice>
 </rng:zeroOrMore>
</rng:element>
element join
{
   att.global.attributes,
   att.global.linking.attributes,
   att.global.analytic.attributes,
   att.global.facs.attributes,
   att.global.change.attributes,
   att.pointing.attributes,
   att.typed.attributes,
   attribute targets { list { data.pointer, data.pointer, data.pointer* } }?,
   attribute result { data.name }?,
   attribute scope { "root" | "branches" }?,
   ( model.descLike | model.certLike )*
}
Schematron

<s:report test="@target and @targets">You may not supply both @target and @targets on <s:name/>
</s:report>
Schematron

<s:report test="not(@target) and not(@targets)">You must supply either @target or @targets on <s:name/>
</s:report>
Schematron

<s:assert test="contains(@target,' ')">You must supply at least two values for @target on <s:name/>
</s:assert>

The following example is discussed in section 16.7 Aggregation:

<sp>
 <speaker>Hughie</speaker>
 <p>How does it go? <q>
   <l xml:id="frog_x1">da-da-da</l>
   <l xml:id="frog_l2">gets a new frog</l>
   <l>...</l>
  </q>
 </p>
</sp>
<sp>
 <speaker>Louie</speaker>
 <p>
  <q>
   <l xml:id="frog_l1">When the old pond</l>
   <l>...</l>
  </q>
 </p>
</sp>
<sp>
 <speaker>Dewey</speaker>
 <p>
  <q>... <l xml:id="frog_l3">It's a new pond.</l>
  </q>
 </p>
 <join target="#frog_l1 #frog_l2 #frog_l3result="lgscope="root"/>
</sp>

The join element here identifies a linegroup (lg) comprising the three lines indicated by the target attribute. The value root for the scope attribute indicates that the resulting virtual element contains the three l elements linked to at #frog_l1 #frog_l2 #frog_l3, rather than their character data content.

In this example, the attribute scope is specified with the value of branches to indicate that the virtual list being constructed is to be made by taking the lists indicated by the target attribute of the join element, discarding the list tags which enclose them, and combining the items contained within the lists into a single virtual list:

<p>Southern dialect (my own variety, at least) has only <list xml:id="LP1">
  <item>
   <s>I done gone</s>
  </item>
  <item>
   <s>I done went</s>
  </item>
 </list> whereas Negro Non-Standard basilect has both these and <list xml:id="LP2">
  <item>
   <s>I done go</s>
  </item>
 </list>.</p>
<p>White Southern dialect also has <list xml:id="LP3">
  <item>
   <s>I've done gone</s>
  </item>
  <item>
   <s>I've done went</s>
  </item>
 </list> which, when they occur in Negro dialect, should probably be considered as borrowings from other varieties of English.</p>
<join
  result="list"
  xml:id="LST1"
  target="#LP1 #LP2 #LP3"
  scope="branches">

 <desc>Sample sentences in Southern speech</desc>
</join>