<zone>

<zone> definisce un'area bidimensionale contenuta all'interno di un elemento surface [11.1 Digital Facsimiles 11.2.2 Embedded Transcription]
Modulotranscr — Representation of Primary Sources
Attributiatt.global (@xml:id, @n, @xml:lang, @xml:base, @xml:space) (att.global.rendition (@rend, @style, @rendition)) (att.global.linking (@corresp, @synch, @sameAs, @copyOf, @next, @prev, @exclude, @select)) (att.global.analytic (@ana)) (att.global.facs (@facs)) (att.global.change (@change)) (att.global.responsibility (@cert, @resp)) (att.global.source (@source)) att.coordinated (@start, @ulx, @uly, @lrx, @lry, @points) att.typed (@type, @subtype) att.written (@hand)
rotateindicates the amount by which this zone has been rotated clockwise, with respect to the normal orientation of the parent surface element as implied by the dimensions given in the msDesc element or by the coordinates of the surface itself. The orientation is expressed in arc degrees.
Stato Opzionale
Tipo di dati teidata.count
Valore di default 0
Membro del
model.linePart model.standOffPart
Contenuto in
linking: standOff
transcr: line surface zone
Può contenere
analysis: c interp interpGrp pc span spanGrp w
certainty: certainty precision respons
core: add binaryObject cb choice del ellipsis gap gb graphic hi index lb media milestone note noteGrp pb q unclear
figures: figure formula notatedMusic
gaiji: g
iso-fs: fLib fs fvLib
linking: alt altGrp anchor join joinGrp link linkGrp seg timeline
spoken: incident kinesic pause shift vocal writing
textcrit: app witDetail
transcr: addSpan damage damageSpan delSpan fw handShift line listTranspose metamark mod path redo restore retrace space substJoin surface undo zone
caratteri di testo
Nota

The position of every zone for a given surface is always defined by reference to the coordinate system defined for that surface.

A graphic element contained by a zone represents the whole of the zone.

A zone may be of any shape. The attribute points may be used to define a polygonal zone, using the coordinate system defined by its parent surface.

A zone is always a closed polygon. Repeating the initial coordinate at the end of the sequence is optional. To encode an unclosed path, use the path element.

Esempio
<surface ulx="14.54" uly="16.14" lrx="0"
 lry="0">
 <graphic url="stone.jpg"/>
 <zone points="4.6,6.3 5.25,5.85 6.2,6.6 8.19222,7.4125 9.89222,6.5875 10.9422,6.1375 11.4422,6.7125 8.21722,8.3125 6.2,7.65"/>
</surface>

This example defines a non-rectangular zone: see the illustration in section 11.2.2.1 Advanced Uses of surface and zone.

Esempio
<facsimile>
 <surface ulx="50" uly="20" lrx="400"
  lry="280">
  <zone ulx="0" uly="0" lrx="500" lry="321">
   <graphic url="graphic.png "/>
  </zone>
 </surface>
</facsimile>

This example defines a zone which has been defined as larger than its parent surface in order to match the dimensions of the graphic it contains.

Content model
<content>
 <alternate minOccurs="0"
  maxOccurs="unbounded">
  <textNode/>
  <classRef key="model.gLike"/>
  <classRef key="model.graphicLike"/>
  <classRef key="model.global"/>
  <elementRef key="surface"/>
  <classRef key="model.linePart"/>
 </alternate>
</content>
Dichiarazione
<rng:element name="zone">
 <rng:ref name="att.global.attributes"/>
 <rng:ref name="att.global.rendition.attributes"/>
 <rng:ref name="att.global.linking.attributes"/>
 <rng:ref name="att.global.analytic.attributes"/>
 <rng:ref name="att.global.facs.attributes"/>
 <rng:ref name="att.global.change.attributes"/>
 <rng:ref name="att.global.responsibility.attributes"/>
 <rng:ref name="att.global.source.attributes"/>
 <rng:ref name="att.coordinated.attributes"/>
 <rng:ref name="att.typed.attributes"/>
 <rng:ref name="att.written.attributes"/>
 <rng:optional>
  <rng:attribute name="rotate"
   a:defaultValue="0">
   <rng:ref name="teidata.count"/>
  </rng:attribute>
 </rng:optional>
 <rng:zeroOrMore>
  <rng:choice>
   <rng:text/>
   <rng:ref name="model.gLike"/>
   <rng:ref name="model.graphicLike"/>
   <rng:ref name="model.global"/>
   <rng:ref name="surface"/>
   <rng:ref name="model.linePart"/>
  </rng:choice>
 </rng:zeroOrMore>
</rng:element>
element zone
{
   att.global.attributes,
   att.global.rendition.attributes,
   att.global.linking.attributes,
   att.global.analytic.attributes,
   att.global.facs.attributes,
   att.global.change.attributes,
   att.global.responsibility.attributes,
   att.global.source.attributes,
   att.coordinated.attributes,
   att.typed.attributes,
   att.written.attributes,
   attribute rotate { teidata.count }?,
   (
      text
    | model.gLike
    | model.graphicLike
    | model.global
    | surface
    | model.linePart
   )*
}