Stylesheet documentation for:

Description

TEI stylesheet dealing with elements from the figures module.

This software is dual-licensed: 1. Distributed under a Creative Commons Attribution-ShareAlike 3.0 Unported License http://creativecommons.org/licenses/by-sa/3.0/ 2. http://www.opensource.org/licenses/BSD-2-Clause All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. This software is provided by the copyright holders and contributors "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the copyright holder or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.

Author: See AUTHORS

Id: $Id: figures.xsl 10326 2012-05-07 17:05:20Z rahtz $

Description

Process element figure

Template	calculateFigureNumber
Parameter	headInXref

<xsl:template match="tei:figure" mode="xref">
  <xsl:choose>
    <xsl:when test="tei:head">
      <xsl:call-template name="calculateFigureNumber"/>
      <xsl:if test="$headInXref='true'">
        <xsl:text>, </xsl:text>
        <xsl:apply-templates mode="plain" select="tei:head"/>
      </xsl:if>
    </xsl:when>
    <xsl:otherwise>
      <xsl:text>this figure</xsl:text>
    </xsl:otherwise>
  </xsl:choose>
</xsl:template>

Description

Process element table

<xsl:template match="tei:table" mode="xref">
  <xsl:choose>
    <xsl:when test="$numberTables='true'">
      <xsl:call-template name="calculateTableNumber"/>
      <xsl:if test="$headInXref='true' and tei:head">
        <xsl:text>. </xsl:text>
        <xsl:apply-templates mode="plain" select="tei:head"/>
      </xsl:if>
    </xsl:when>
    <xsl:otherwise>
      <xsl:choose>
        <xsl:when test="tei:head">
          <xsl:apply-templates mode="plain" select="tei:head"/>
        </xsl:when>
        <xsl:otherwise>
          <xsl:text>table</xsl:text>
        </xsl:otherwise>
      </xsl:choose>
    </xsl:otherwise>
  </xsl:choose>
</xsl:template>

Description

[latex] Analyze attributes of graphics inclusion

Parameters

Parameter

standardScale

QName	Namespace
mode	No namespace

<xsl:template name="graphicsAttributes">
  <xsl:param name="mode">fo</xsl:param>
  <xsl:if test="@width">
    <xsl:choose>
      <xsl:when test="ends-with(@width,'%')">
        <xsl:choose>
          <xsl:when test="$mode='fo'">
            <xsl:attribute name="content-width">
              <xsl:value-of select="@width"/>
            </xsl:attribute>
          </xsl:when>
          <xsl:when test="$mode='latex'">
            <xsl:text>width=</xsl:text>
            <xsl:value-of select="number(substring-before(@width,'%')) div 100"/>
            <xsl:text>\textwidth,</xsl:text>
          </xsl:when>
          <xsl:otherwise>
            <xsl:attribute name="width">
              <xsl:value-of select="@width"/>
            </xsl:attribute>
          </xsl:otherwise>
        </xsl:choose>
      </xsl:when>
      <xsl:otherwise>
        <xsl:variable name="w">
          <xsl:choose>
            <xsl:when test="ends-with(@width,'pt')">
              <xsl:value-of select="@width"/>
            </xsl:when>
            <xsl:when test="ends-with(@width,'px') and $mode='latex'">
              <xsl:value-of select="substring-before(@width,'px')"/>
              <xsl:text>pt</xsl:text>
            </xsl:when>
            <xsl:when test="ends-with(@width,'in')">
              <xsl:value-of select="@width"/>
            </xsl:when>
            <xsl:when test="ends-with(@width,'px')">
              <xsl:value-of select="@width"/>
            </xsl:when>
            <xsl:when test="ends-with(@width,'cm')">
              <xsl:value-of select="@width"/>
            </xsl:when>
            <xsl:otherwise>
              <xsl:value-of select="@width"/>
              <xsl:text>pt</xsl:text>
            </xsl:otherwise>
          </xsl:choose>
        </xsl:variable>
        <xsl:choose>
          <xsl:when test="$mode='fo'">
            <xsl:attribute name="content-width">
              <xsl:value-of select="$w"/>
            </xsl:attribute>
          </xsl:when>
          <xsl:when test="$mode='latex'">
            <xsl:text>width=</xsl:text>
            <xsl:value-of select="$w"/>
            <xsl:text>,</xsl:text>
          </xsl:when>
        </xsl:choose>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:if>
  <xsl:if test="@height">
    <xsl:choose>
      <xsl:when test="ends-with(@height,'%')">
        <xsl:choose>
          <xsl:when test="$mode='fo'">
            <xsl:attribute name="content-height">
              <xsl:value-of select="@height"/>
            </xsl:attribute>
          </xsl:when>
          <xsl:when test="$mode='latex'">
            <xsl:text>height=</xsl:text>
            <xsl:value-of select="number(substring-before(@height,'%')) div 100"/>
            <xsl:text>\textheight,</xsl:text>
          </xsl:when>
          <xsl:otherwise>
            <xsl:attribute name="height">
              <xsl:value-of select="@height"/>
            </xsl:attribute>
          </xsl:otherwise>
        </xsl:choose>
      </xsl:when>
      <xsl:otherwise>
        <xsl:variable name="h">
          <xsl:choose>
            <xsl:when test="ends-with(@height,'pt')">
              <xsl:value-of select="@height"/>
            </xsl:when>
            <xsl:when test="ends-with(@height,'px') and $mode='latex'">
              <xsl:value-of select="substring-before(@height,'px')"/>
              <xsl:text>pt</xsl:text>
            </xsl:when>
            <xsl:when test="ends-with(@height,'in')">
              <xsl:value-of select="@height"/>
            </xsl:when>
            <xsl:when test="ends-with(@height,'px')">
              <xsl:value-of select="@height"/>
            </xsl:when>
            <xsl:when test="ends-with(@height,'cm')">
              <xsl:value-of select="@height"/>
            </xsl:when>
            <xsl:otherwise>
              <xsl:value-of select="@height"/>
              <xsl:text>pt</xsl:text>
            </xsl:otherwise>
          </xsl:choose>
        </xsl:variable>
        <xsl:choose>
          <xsl:when test="$mode='fo'">
            <xsl:attribute name="content-height">
              <xsl:value-of select="$h"/>
            </xsl:attribute>
          </xsl:when>
          <xsl:when test="$mode='latex'">
            <xsl:text>height=</xsl:text>
            <xsl:value-of select="$h"/>
            <xsl:text>,</xsl:text>
          </xsl:when>
        </xsl:choose>
      </xsl:otherwise>
    </xsl:choose>
  </xsl:if>
  <xsl:variable name="s">
    <xsl:choose>
      <xsl:when test="@scale and ends-with(@scale,'%')">
        <xsl:value-of select="number(substring-before(@scale,'%')) div 100"/>
      </xsl:when>
      <xsl:when test="@scale">
        <xsl:value-of select="@scale"/>
      </xsl:when>
      <xsl:when test="not(@width) and not(@height) and not($standardScale=1)">
        <xsl:value-of select="$standardScale"/>
      </xsl:when>
    </xsl:choose>
  </xsl:variable>
  <xsl:if test="not($s='')">
    <xsl:choose>
      <xsl:when test="$mode='fo'">
        <xsl:attribute name="scale">
          <xsl:value-of select="$s"/>
        </xsl:attribute>
      </xsl:when>
      <xsl:when test="$mode='latex'">
        <xsl:text>scale=</xsl:text>
        <xsl:value-of select="$s"/>
        <xsl:text>,</xsl:text>
      </xsl:when>
    </xsl:choose>
  </xsl:if>
</xsl:template>

<xsl:template name="calculateFigureNumber">
  <xsl:choose>
    <xsl:when test="ancestor::tei:front and  $numberFrontFigures='true'">
      <xsl:call-template name="i18n">
        <xsl:with-param name="word">figureWord</xsl:with-param>
      </xsl:call-template>
      <xsl:text> </xsl:text>
      <xsl:number count="tei:figure[tei:head]" from="tei:front" level="any"/>
    </xsl:when>
    <xsl:when test="ancestor::tei:back and $numberBackFigures='true'">
      <xsl:call-template name="i18n">
        <xsl:with-param name="word">figureWord</xsl:with-param>
      </xsl:call-template>
      <xsl:text> </xsl:text>
      <xsl:number count="tei:figure[tei:head]" from="tei:back" level="any"/>
    </xsl:when>
    <xsl:when test="ancestor::tei:body and $numberFigures='true'">
      <xsl:call-template name="i18n">
        <xsl:with-param name="word">figureWord</xsl:with-param>
      </xsl:call-template>
      <xsl:text> </xsl:text>
      <xsl:number count="tei:figure[tei:head]" from="tei:body" level="any"/>
    </xsl:when>
  </xsl:choose>
</xsl:template>

Template

tei:tablexref

<xsl:template name="calculateTableNumber">
  <xsl:call-template name="i18n">
    <xsl:with-param name="word">tableWord</xsl:with-param>
  </xsl:call-template>
  <xsl:text> </xsl:text>
  <xsl:number level="any"/>
</xsl:template>

Stylesheet documentation generated by <oXygen/>^® XML Editor.

Mode:

Showing:

Description

Description

Description

Description

Parameters